Starfyyre Posted January 26, 2015 Posted January 26, 2015 also does anyone know the full version of these links and not the shortened one? cause my my 3ds browser and my pc browser dont load them...since the short links are not allowed in my country ....i used a proxy browser and it loaded Edit ild like the unshortned links if possible pls
EmZephyr Posted January 26, 2015 Posted January 26, 2015 Also when I try to run savefile to PCdata i get a unhandled exception: System.notsupported Exception: Memory stream is not expandable
SpiffySansCause Posted January 26, 2015 Posted January 26, 2015 also does anyone know the full version of these links and not the shortened one? cause my my 3ds browser and my pc browser dont load them...since the short links are not allowed in my country ....i used a proxy browser and it loadedEdit ild like the unshortned links if possible pls The first one is http://dukesrg.no-ip.org/3ds/rop/?LoadCode.dat&pcout.bin , and the second one is http://dukesrg.no-ip.org/3ds/rop/?LoadCode.dat&pcin.bin . This site should also help you.
sylphid91 Posted January 26, 2015 Posted January 26, 2015 Guys, i'm stuck at step 16.. When i check the pc, the pokemon that i edited is not right there.. But when i import the "pcdata.bin" to the PKHeX again, the pokemon is edited.. Sry for my bad english.. My "pcdata.bin" is 211K and i used an old 3DS *Solved* After i use the file that | M | share and follow the step it success.. Thx a lot.. You are amazing
GreatTornado Posted January 26, 2015 Posted January 26, 2015 When I try to import pcdata.bin on step 8, it gives an error saying "Attempted to load an unsupported file size/type". What I do is I open PKHeX, go to file and click open, for the file type click "binary files" and then try to open pcedit.bin. Help?
BattleLegend Posted January 26, 2015 Posted January 26, 2015 Attempted to load unsupported save/file size. For me. It said
iTimTim Posted January 26, 2015 Posted January 26, 2015 Made an account for this and i am having this problem. http://prntscr.com/5x67r4
BattleLegend Posted January 26, 2015 Posted January 26, 2015 Made an account for this and i am having this problem. http://prntscr.com/5x67r4 You might of did something wrong. You might have to clear off those files that SciresM had from that other thread
GreatTornado Posted January 26, 2015 Posted January 26, 2015 You might of did something wrong. You might have to clear off those files that SciresM had from that other thread Did you get it working?
GreatTornado Posted January 26, 2015 Posted January 26, 2015 Made an account for this and i am having this problem. http://prntscr.com/5x67r4 Attempted to load unsupported save/file size. For me. It said So what you guys need to do is redownload PKHeX, for some reason the "Attempted to load unsupported save/file size" error only happens on older versions so download the newest version of PKHeX and it should work!
Merfner Posted January 26, 2015 Posted January 26, 2015 Hey guys. I just tried doing this. I have put pcin.bin and pcout.bin onto my SD card, on the main part. Opened my game, then went to browser and went to the site. It goes through the process, and crashes the internet. I put the SD card back in my computer, and there is no savedata bin or whatever. It's still just pcin and pcout. Nothing new. I'm on a compatible firmware, I cleared history and cookies, and I reset the whole internet. Nothing works. I've been through the process 5 times and it never adds anything new. Help? EDIT: Ok, just tried again the exact same way I've been doing and it worked. Lol. Don't know what was happening..
hiten Posted January 26, 2015 Posted January 26, 2015 Hey guys. I just tried doing this. I have put pcin.bin and pcout.bin onto my SD card, on the main part. Opened my game, then went to browser and went to the site. It goes through the process, and crashes the internet. I put the SD card back in my computer, and there is no savedata bin or whatever. It's still just pcin and pcout. Nothing new. I'm on a compatible firmware, I cleared history and cookies, and I reset the whole internet. Nothing works. I've been through the process 5 times and it never adds anything new. Help? EDIT: Ok, just tried again the exact same way I've been doing and it worked. Lol. Don't know what was happening.. Did you try to disable wireless first before accessing the bookmark? (the instruction from first post) If it still doesn't work, try accessing the URL via QR codes (post #3).
Kadow Posted January 26, 2015 Posted January 26, 2015 Can someone please help me? Everything is fine until when i go to my boxes and my Pokemon that i just made aren't there. I don't know what I'm doing wrong.
Dyshonest Posted January 26, 2015 Posted January 26, 2015 So... is there any potential for further arbitrary-code execution (flash-cart capabilities but with your SD card?) with this considering we can mold the boxes to be whatever we want? Would ACE in a game have any more potential than from what the browser is capable of?
Khaisz Posted January 26, 2015 Posted January 26, 2015 Hello guys, I'm having a problem.Everything goes fines until I go to the step 16. I go to http://bit.ly/1JpcyGT on my browser, then it crashes and when I go back to my game and check my PC my game crashes it says the same thing as the browser when it crashes except that it resets my 3ds... I'm using Pokémon Y. D: I'm having the exact same problem and I'm using Pokemon OR. I also tried genning in 4 boxes at once.
KazoWAR Posted January 26, 2015 Author Posted January 26, 2015 For everyone having problems with PKHeX saying the file type is unsupported. please make sure you have the most recent version. http://projectpokemon.org/forums/showthread.php?36986-PKHeX-%28Gen-6-SAV-PKX-Editor%29 if it still fails to open the file, then please post a link to it here.
SunWukong Posted January 26, 2015 Posted January 26, 2015 Does anyone know if it's possible it insert multiple pokemon into PKHeX boxes at once? I downloaded a pack of 600+ pokemon to use with this hack, and it's kind of tedious dragging and dropping each one. Also is there a way to apply a change to all pokemon in one box, for example make all pokemon in box 1 shiny, or change the trainer info for them all at once?
zwab Posted January 26, 2015 Posted January 26, 2015 Does anyone know if it's possible it insert multiple pokemon into PKHeX boxes at once? I downloaded a pack of 600+ pokemon to use with this hack, and it's kind of tedious dragging and dropping each one. Also is there a way to apply a change to all pokemon in one box, for example make all pokemon in box 1 shiny, or change the trainer info for them all at once? I believe this is the wrong thread for this sort of question, this should probably be asked in the PKHeX thread.
Lexiel Posted January 26, 2015 Posted January 26, 2015 Hello guys, I'm having a problem.Everything goes fines until I go to the step 16. I go to http://bit.ly/1JpcyGT on my browser, then it crashes and when I go back to my game and check my PC my game crashes it says the same thing as the browser when it crashes except that it resets my 3ds... I'm using Pokémon Y. D: I'm having the exact same problem and I'm using Pokemon OR. I also tried genning in 4 boxes at once. I'm having the same issue. Whenever I'm checking my PC in my Alpha Sapphire after I do step 16 my game crashes and it resets. Any advice?
Khaisz Posted January 26, 2015 Posted January 26, 2015 For everyone having problems with PKHeX saying the file type is unsupported. please make sure you have the most recent version. http://projectpokemon.org/forums/showthread.php?36986-PKHeX-%28Gen-6-SAV-PKX-Editor%29 if it still fails to open the file, then please post a link to it here. Decided to give this a 3rd try for good luck, but.. http://i.imgur.com/uxN5x0i.png and here is my pcdata file https://www.dropbox.com/s/oonauuutbycxzbk/pcdata.bin?dl=0 oh and I got the latest file. Edit: Just to mention, Doing 1 box with boxdata.bin works, but not multiply boxes.
SunWukong Posted January 26, 2015 Posted January 26, 2015 If you're following all the instructions, it should work fine... I just injected over 600 competitive battle ready Pokemon into my Omega Ruby game (22 boxes total) and it worked perfectly. Has anyone tried using the same pcdata.bin on mutiple games? It would be cool if we could make on pcdata file with all Pokemon and share it.
Apache Thunder Posted January 26, 2015 Posted January 26, 2015 Attempted to load unsupported save/file size. For me. It said This is a bit off topic but....EMPTY YOUR F***KING INBOX! Tried to reply you a PM you sent me, but it seems you don't even bother to keep your inbox under the max stored message quota. So I can't reply to it. Really annoying when people do this....
KazoWAR Posted January 26, 2015 Author Posted January 26, 2015 Decided to give this a 3rd try for good luck, but.. http://i.imgur.com/uxN5x0i.pngand here is my pcdata file https://www.dropbox.com/s/oonauuutbycxzbk/pcdata.bin?dl=0 oh and I got the latest file. Edit: Just to mention, Doing 1 box with boxdata.bin works, but not multiply boxes. that file is 256KB please download the new version of pcedit
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now