KazoWAR Posted January 25, 2015 Posted January 25, 2015 (edited) Save File Dumping and Injection is available here. DO NOT SAVE UNTIL YOU CAN VERIFY ALL THE DATA WAS COPIED CORRECTLY If you have problems with PCEdit, go check out RAM2Sav This lets you dump all 31 boxes from the running game and use PKHeX(be sure to get the update that supports opening pcdata.bin) to fully edit the entire PC. Once your done you can then inject it back into the game. A new version has been uploaded, this version now shows a solid color on the bottom screen when exiting. A green screen means all is good, it should have successfully dumped pcdata.bin or injected it back into the game. A red screen means it was unable to find the PC data in memory, to fix this make sure the game is running and you are ingame(can walk around). If the browser crashes back to the homescreen without showing green or red screen, then this means the code never ran! To fix this Make sure you 3DS Firmware version is either 9.0, 9.1, 9.2, 9.3, 9.4, or 9.5.0-22 (9.5.0-23+ BLOCKS THIS). (For Gateway users, make sure you are using SysNAND, EmuNAND is not supported.) Make sure you are using a 3DS or 3DS XL, the New 3DS and New 3DS XL(the ones with the C-Stick) are not supported. If you are on a 9.X FW and you do not have a New 3DS then try this below. disable wireless open browser add bookmarks for the urls(pcin.bin(http://bit.ly/1JpcyGT) and pcout.bin(http://bit.ly/1yRUulB) use different URLs) clear history and cookies, do not hit OK just hit home to exit. then every time you go to run homebrew disable wireless(if you have a 2DS just ignore this part) open browser go to bookmarks enable wireless(if you have a 2DS just ignore this part) pick a bookmark If PKHeX is saying unsupported file type when you try to open pcdata.bin go download the newest version of PKHeX here. If you have the newest version(released 1/27/15 or later and it is still not working then send me a PM. HOW TO USE 1. Copy pcin.bin and pcout.bin onto your 9.X 3DS(no emunand/no new 3ds(the one with the C-stick)) SD card. 2. Run X/Y/OR/AS and get ingame. 3. Hit the home menu and go to the browser. 4. Go to http://bit.ly/1yRUulB(http://dukesrg.no-ip.org/3ds/rop/?LoadCode.dat&pcout.bin) to run pcout.bin. 5. Wait for it the crash back to the home menu. 6. Power down the 3ds. 7. Take out your SD card and put it in the PC. 8. Open pcdata.bin in PKHex. 9. Go to Tool -> Toggle Box Interface 10. Edit to your desire. 11. Export pcdata.bin with the Save Box Data++ under the Tools tab. 12. Run X/Y/OR/AS and get ingame. 13. Hit the home menu and go to the browser. 14. Go to http://bit.ly/1JpcyGT(http://dukesrg.no-ip.org/3ds/rop/?LoadCode.dat&pcin.bin) to run pcin.bin. 15. Wait for it the crash back to the home menu. 16. Check your PC. Video Tutorial [video=youtube;a98gO9kYF7I] Source Code pcin.c http://pastebin.com/bnYrT2kR pcout.c http://pastebin.com/ZLgbyQxq Since I had so many requests for it, here is my Living Dex. [ATTACH]13548[/ATTACH] [Edit by evandixon] Some of the URLs above are dead, so use these instead: Reason: dukesrg.no-ip.org moved to dukesrg.dynu.com. Generated new short URLs.pcin.bin: http://roc.ms/pcin pcout.bin: http://roc.ms/pcout pcedit.rar Edited July 19, 2016 by KazoWAR
Favna Posted January 25, 2015 Posted January 25, 2015 This..... has.... a hell lot of potential.. -downloads-
Favna Posted January 25, 2015 Posted January 25, 2015 Following the example of Apache Thunder on Save R&D for injecting single pokemon, I made QR codes for the url's. I just confirmed the one for PCout works, so most likely PCIn will as well. Edit: put in a spoiler to save comment size PCOut: PCIn:
tyuoo Posted January 25, 2015 Posted January 25, 2015 A quick question Since it dumps your save? You can also edit your save things like wondercards Items etc with this?
Favna Posted January 25, 2015 Posted January 25, 2015 A quick questionSince it dumps your save? You can also edit your save things like wondercards Items etc with this? It only dumps box data actually. I checked that.. but when I opened party/battlebox I got my answer since there is only a bulbasaur there and my party actually has Smeargle / Sharpedo / Volcarona atm
tyuoo Posted January 25, 2015 Posted January 25, 2015 It only dumps box data actually. I checked that.. but when I opened party/battlebox I got my answer since there is only a bulbasaur there and my party actually has Smeargle / Sharpedo / Volcarona atm Ah ok makes sense now
aquaguy34 Posted January 25, 2015 Posted January 25, 2015 You can still attach hold items to your pokes in PKHex, so you are able to receive items through that method. Just make sure they're hold items and not key items.
spyexxx Posted January 25, 2015 Posted January 25, 2015 Are you supposed to save your game between steps 5 and 6?
andre_llucas Posted January 25, 2015 Posted January 25, 2015 Are you supposed to save your game between steps 5 and 6? I turned off directly and still worked, so I guess you don't need to save
Cali Posted January 25, 2015 Posted January 25, 2015 Sorry for dumbass question, but I'm not able to edit my save as you are, I get as the above mentioned bulbasaur party member and none of my current pokemon. Could anyone please explain me in detail why? lol
aquaguy34 Posted January 25, 2015 Posted January 25, 2015 It will only dump our box pokemon, not your party pokemon or battle box. Try clicking on the tab in PKHex called "Box"
MG0310 Posted January 25, 2015 Posted January 25, 2015 The pokemon don't seem to be popping up for me when I use PkHex
Cali Posted January 25, 2015 Posted January 25, 2015 Dont get me wrong, I did. However no custom data was displayed whatsoever, simply the buttons that I couldnt click before now I am able to. (just created one to test, it worked however all my junk pokemon are gone now http://prntscr.com/5x0536 )
bury Posted January 25, 2015 Posted January 25, 2015 "1. Copy pcin.bin and pcout.bin onto your 9.X 3DS SD card." in which folder? i dont understand this lol edit: can anybody explain or answer this pls :-x
MK73DS Posted January 25, 2015 Posted January 25, 2015 "1. Copy pcin.bin and pcout.bin onto your 9.X 3DS SD card."in which folder? i dont understand this lol edit: can anybody explain or answer this pls :-x In no folder ... just on the SD card (we call this the root of the SD card)
Cali Posted January 25, 2015 Posted January 25, 2015 Hell.. this is why you dont let blondies play games. I figured what was my issue, used the wrong .bat file first. It might be useful to actually number them for the extremely dumb ones like me lol thank you so much for making this software available to all of the community. I will use a unpatched and not updated 3ds xl for this app so I will never be able to be stopped with this.
jm-plata Posted January 25, 2015 Posted January 25, 2015 Link DEAD Download https://www.mediafire.com/?mbn5kb0f07o5rbu
bury Posted January 25, 2015 Posted January 25, 2015 hm dont have pin.out/in bookmarked as you do and if i type the page as address in it cant found as suggest, but it doesnt "crash" what im doing wrong?
Michu Posted January 25, 2015 Posted January 25, 2015 This makes cloning much easier. Put pokemon you want to clone in the box, run pcout.bin, move this pokemon to party, and then run pcin.bin. After that, your pokemon will be in the box AND your party!
Cali Posted January 25, 2015 Posted January 25, 2015 hm dont have pin.out/in bookmarked as you do and if i type the page as address in it cant found as suggest, but it doesnt "crash" what im doing wrong? Press L and R while being in the menu (game paused) and you will be taken to a camera, press the QR button and then simply scan in the first code of the poster from the first page. You will be taken to the right place.
|M| Posted January 25, 2015 Posted January 25, 2015 I see this is debunked now unless I am doing something wrong. I dont have a homebrew 2/3ds but I can dump my save file and cant re-inject it...
Kaphotics Posted January 25, 2015 Posted January 25, 2015 Use the Single Box version in the meantime, dunno what is up with mediafire.
KazoWAR Posted January 25, 2015 Author Posted January 25, 2015 sorry i was in the middle up uploading a new version and i got side tracked.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now