jasterj Posted April 2, 2011 Posted April 2, 2011 I see. If that doesnt work try marking it as hatched and see what happens.
PopEyeJR Posted April 2, 2011 Posted April 2, 2011 (edited) Tried that but it still reports a problem The IV's are godly man. Try reducing it then generate it. Edited April 2, 2011 by PopEyeJR
Kaphotics Posted April 2, 2011 Posted April 2, 2011 Haxorus: PID: 76DF72ED (0/1) ID: 0 SID: 1 Wild PID correlation, check. Ability: 2 (Mold Breaker) Check Moves: Legal (level up + TM) I don't see any escape sequences after the name field / OT name field Haxorus\FFFF\0000\0000\FFFF TWIN\FFFF\0000\0000\FFFF
lolface Posted April 2, 2011 Posted April 2, 2011 The IV's are godly man. Try reducing it the generate it. I cut down all of the IVs to 15 and it still did not work. Though I'm not particularly sure why the IVs would be the fault since the other PKMs I made that passed had flawless IVs as well.. Any other suggestions? I don't see any escape sequences after the name field / OT name field Haxorus\FFFF\0000\0000\FFFF TWIN\FFFF\0000\0000\FFFF I'll add the escape sequences and edit this comment with results. Thanks EDIT: Still reports a problem...
lolface Posted April 2, 2011 Posted April 2, 2011 Here is the current Haxorus pkm. I was making some other pkms (Zoroark and Hydreigon) that worked successfully but the uploaded Excadrill pkm also failed the legitimacy test. Perhaps there is some common error I am making with Haxorus and Excadrill... To my knowledge, though, I am using the same method to create all the pkms, both failed and successful. Haxorus.pkm Excadrill.pkm
jasterj Posted April 2, 2011 Posted April 2, 2011 your Excadrill had the wrong location and level give this a try. Oh and if you were trying to enter random battle with Excadrill and Haxorus then the mole was the problem cus I dont see anything wrong with Haxorus. Excadrill.pkm
PopEyeJR Posted April 2, 2011 Posted April 2, 2011 Finished with Haxorus. The PID was... impossible. Needed to change some IV's. Haxorus.pkm
lolface Posted April 2, 2011 Posted April 2, 2011 your Excadrill had the wrong location and level give this a try. Oh and if you were trying to enter random battle with Excadrill and Haxorus then the mole was the problem cus I dont see anything wrong with Haxorus. The Excadrill is still getting rejected on random battle wifi. Nope, I tried to enter random battle with Haxorus and two other random pokemon I caught in game. Finished with Haxorus. The PID was... impossible. Needed to change some IV's. Thank you but could you explain why the PID was impossible for the IVs I put? I wanted a Flawless Shiny Haxorus which is why the IVs were like that. It's not like I went over 31 and the rest of my flawless IV'd pkms went through fine. Also, I thought IVs were in no way related to the PID (per original post).
jasterj Posted April 2, 2011 Posted April 2, 2011 I just put both onto my White version and had no problems getting into a random battle. It has to be another pokemon in your party.
PopEyeJR Posted April 2, 2011 Posted April 2, 2011 The Excadrill is still getting rejected on random battle wifi. Nope, I tried to enter random battle with Haxorus and two other random pokemon I caught in game. Thank you but could you explain why the PID was impossible for the IVs I put? I wanted a Flawless Shiny Haxorus which is why the IVs were like that. It's not like I went over 31 and the rest of my flawless IV'd pkms went through fine. Also, I thought IVs were in no way related to the PID (per original post). Sorry. I didn't mean the PID was impossible. What I really meant was that PokeGen couldn't find a PID with all IV's 15. If all IV's were 30's and one was 31 then it could've found it. LOL I just read over my older post and I sounded like the IV's didn't exist. Yeah, that came out wrong. Now... the IV's is not related to the PID but it is needed in PokeGen for some reason. I still don't know that much about PID's...
lolface Posted April 2, 2011 Posted April 2, 2011 I just put both onto my White version and had no problems getting into a random battle. It has to be another pokemon in your party. That is really disconcerting; I know it isn't another pokemon in my party because the second I remove Haxorus or Excadrill I can random battle with absolutely no problems.
jasterj Posted April 2, 2011 Posted April 2, 2011 That is really disconcerting; I know it isn't another pokemon in my party because the second I remove Haxorus or Excadrill I can random battle with absolutely no problems. I used the Excadrill I uploaded and popeyes haxorus and got in with no problems at all.
lolface Posted April 3, 2011 Posted April 3, 2011 I used the Excadrill I uploaded and popeyes haxorus and got in with no problems at all. I still can't enter with your uploaded Excadrill or Popeye's Haxorus. Is there any logical explanation for why they would be legitimate on one DS and not the other?
jasterj Posted April 3, 2011 Posted April 3, 2011 Try with legit pokemon meaning caught from ingame without cheats and see if you can get in. It HAS to be another pokemon in your party causing it.
lolface Posted April 3, 2011 Posted April 3, 2011 Try with legit pokemon meaning caught from ingame without cheats and see if you can get in. It HAS to be another pokemon in your party causing it. I tried a party of two legit, caught ingame without cheat pokemon and Popeye's Haxorus. Didn't go through. I tried a party of two legit, caught ingame without cheat pokemon and your Excadrill. Didn't go through.
jasterj Posted April 3, 2011 Posted April 3, 2011 I have no idea then what could be the problem. Only think I can think of is you have cheats on of some kind.
lolface Posted April 3, 2011 Posted April 3, 2011 Both of them now work. What I did was put them in my PC, saved my game, turned my game off, and tried again successfully. (Someone else had a similar confounding problem as I did and this was their solution as well) On a side note, Popeye's Haxorus was encountered at Level 0...
jasterj Posted April 3, 2011 Posted April 3, 2011 lol yes if you were using the GTS exploit and didnt have a full party problems occur and putting them in the pc fixes them.
PopEyeJR Posted April 3, 2011 Posted April 3, 2011 Both of them now work. What I did was put them in my PC, saved my game, turned my game off, and tried again successfully. (Someone else had a similar confounding problem as I did and this was their solution as well) On a side note, Popeye's Haxorus was encountered at Level 0... Lol... I should stop putting the Met at Level to 0. I'm use to it though. I don't even think it affects the Pokemon's ability to enter WiFi.
ReignOfComputer Posted April 3, 2011 Posted April 3, 2011 In what cases does the Escape Sequence appear for the OT Name? Some of the Pokemon I have have some Escape Sequence for the OT Name, whereas some do not have any at all. All OTs are the same.
color.me.envious Posted April 3, 2011 Posted April 3, 2011 I've encountered a strange occurrence with Pokegen and Gen V. No matter what, when I make a Pokemon, regardless of actual legality, when I generate an ARDSi code for it and then insert it into my party, it fails to pas wi-fi. HOWEVER, if I deposit it into the PC and withdraw it, it will then pass the wi-fi check. I'm not sure what's causing it (escape sequence issues maybe?), but if anyone is having a serious issue with passing wi-fi using Pokemon with absolutely no noticeable flaws or illegalities, you may want to try depositing and withdrawing it from the PC, especially if you're using an AR to insert it into the game. Also, if anyone could explain to me why this is occurring for me, I'd love them forever.
rsn Posted April 7, 2011 Posted April 7, 2011 Are there any specifics to put in the Met Tab for generating traded Pokemon this time? In the 4th gen games, traded Pokemon were given the "Apparently Met" flag, and so you simply had to put in the location with different trainer info. Does that still apply to Black and White? And what about traded eggs that hatch after traded? Would the Egg Received location for traded eggs still be the DayCareCouple? Reason I'm asking is because I noticed there are location options for "Link Trade", but I believe those are used for the ingame trades (eg: Petilil for Cottonee).
PopEyeJR Posted April 7, 2011 Posted April 7, 2011 Are there any specifics to put in the Met Tab for generating traded Pokemon this time? In the 4th gen games, traded Pokemon were given the "Apparently Met" flag, and so you simply had to put in the location with different trainer info. Does that still apply to Black and White? And what about traded eggs that hatch after traded? Would the Egg Received location for traded eggs still be the DayCareCouple? Reason I'm asking is because I noticed there are location options for "Link Trade", but I believe those are used for the ingame trades (eg: Petilil for Cottonee). -If you create a Pokemon with a different TID then yours then that Pokemon will have the Apparently Met flag -Pokemon that are Eggs or are already hatched will always have the Day-care couple selected in the Location drop list. If a hatched Pokemon got transferred from Gen IV to Gen V then the Location will have to be Poketransfer. -Link trade is for in game trades.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now