All Activity

@Snarbo I’m not a mod, but it’s against the forum rules and is illegal to post ROM files here. I advise to remove it from your post.

Hi everyone, I've spent countless hours trying to fix my Leaf Green run but haven't found a working solution yet. I got my RG353V and started a Leaf Green playthrough straight out of the box (The only tweak I've done was moved everything to a trusted SD card). At the time I wasn't aware of the issues with the ROM that comes with the console but got over the SS Anne issue using a walk through walls workaround. Since the ROM itself would crash every time I'd try saving the game I put my trust in the save state function. I pushed through and beat the final four but after beating the rival, the game auto saves and I can't get past it. I've looked at many solutions to this issue and this is what I've tried: Downloading a verified ROM, renaming it to match the broken one and loading the save state - outcome: states load but aren't playable, just a snapshot of where I've saved. Tried using a verified ROM to create a save state, moving it to the SD card and using it to save the game - outcome: game loads where I've saved but I still can't overwrite it with my saved state. Tried taking everything save related and opening it on my PC using mGBA (both the verified and broken ROM) - outcome: Says the save state is corrupt and doesn't load. Checked file sizes as many people advised on the forum, both .srm and .sav are 128 kb, save state is 56 kb though. I haven't been able to get the state to work on my PC at all and wonder if there's anything else I could grab from the SD card to get it working. Could anyone please have a look at this and advise how I can migrate my saved state (.state4 file) to a .sav or .srm file? I've attached the files I've found and if there's anything else you need please let me know. 005 Pokemon Leaf Green.gba 005 Pokemon Leaf Green.sav 005 Pokemon Leaf Green.srm 005 Pokemon Leaf Green.state4

Hello friends! I hope that you are all having a wonderful day! I am doing my first ever playthrough of Super Mystery Dungeon completely blind. I love the game so far, but have had a major urge to be turned into an Axew the whole playthrough. I grew majorly attached to him after Gates to Infinity and wanted to be him for my playthrough of Super. How difficult would the modding process be past the initial basics? Do you know if specifically for Axew this would cause any issues? He has data for animations in GTI and Portraits for his emotions. Is this something that would be as simple as just inputting him in the preselected options, or would I need to go through more steps for this? If I need to manually add in animations myself, would that be something that I can easily do or would it require much more work? How are Growth Rates decided for the player being turned into a pokemon not on the regular list? Would it use Axew's NPC stats, or would it use stats from GTI? If not, can they be modified if I for example want to shuffle my stats to become a bit more of a tank? And on top of that, can I even remove moves from my move list such as Dual Chop to make it so I do not get tempted to use it haha. And also, would I need to delete my save file if I did all of this? I am only a handful of hours in, so I was not sure if it would be needed or not regardless. Finally, would these changes still work on a regular 3DS? I have the game there and have never tried properly using mods on there haha. I apologise for all of the probably basic questions. To anybody reading this, thank you ever so much!

[plugin]: SWSH Overworld/Max Raid IVs/BDSP Roaming8b Searcher 26.4.12+37 [report]: Invalid: Unable to match an encounter from origin game. Valid Move 1: SWSH-Learned by Level-up. @ lv28 Valid Move 2: SWSH-Learned by Level-up. @ lv56 Valid Move 3: SWSH-Learned by Level-up. @ lv49 Valid Move 4: SWSH-Learned by TM/HM. Valid Relearn Move 1: Empty Move. Valid Relearn Move 2: Empty Move. Valid Relearn Move 3: Empty Move. Valid Relearn Move 4: Empty Move. Valid: Nickname matches species name. Valid: Current level is not below met level. Valid: All ribbons accounted for. Valid: Ability matches ability number. Valid: Correct ball for encounter type. Valid: Form is Valid. Valid: Form argument is valid. Valid: Original Trainer Memory is valid. Encounter Type: Invalid (Lunala) PID Type: None Encounter Type: Invalid (Lunala) Version: Shield Level: 65 I caught them by hand and wanted to edit their IVs most of them are editable like Mewtwo or Necrozma or others it only doesn't work for Lunala if I click the send to viewer button when I was viewring Lunala then it's level will be changed from 70 to 65 but this won't happen for the others

Hmm that sounds like a bug to fix. And as for the gender, you're totally right, and the first to notice that it's totally missing. I'll upload a better version once a more substantial amount of these things or issues have been noticed/gathered.

Maybe I'm just blind but is there a nature edit option?

The tool has excellent potential, but when selecting natures and EVs, the editor refused to apply those natures I selected Modest Venusaur Max HP Max Sp.Attack but it gave me Naive Max HP Max Speed?? Also, and this is by no means a big deal, why is there no option to select a gender?

1. You can add your own starter choices through SkyTemple as of this version. 2. My understanding is that there's still a hard cap on pokemon count and she's already run up against it, so probably not

i was wondering what kind of updates you will add to this (i hope for more starters~ for another playthrough) and once we get gen ten and pmd sprite repository adds the gen 10 pokemon to its site will you add them to this?

Hi all! I wanted to share a working follow-up to this thread: a Flipper Zero app that sends Mystery Gift to real Gen II cartridges over IR using a custom GPIO board. It acts as the master/sender: link up from the Mystery Gift screen (A-press or idle detection both work) Pick any of the 37 giftable items on the Flipper (Berry → Rare Candy → Mails), set trainer name, set or randomize the trainer ID per send (sidesteps the one-gift-per-partner-per-day check while testing) Region is auto-detected: since the master receives the cart's region code before ever sending one, the app just echoes it back. Only tested on french cartridge atm Auto-retries failed exchanges (they happen, as the OP noted), and writes a microsecond-resolution trace of every exchange to the SD card so that it's easier to debug. The Flipper's built-in IR is useless here (its receiver is a 38 kHz demodulator, blind to the GBC's unmodulated light), so this uses the receiver schematic posted in this thread (BPW34 → MCP6002 TIA 51k‖120pF → comparator → BC337) plus an IR LED, on two GPIO pins with 5 V from the Flipper's OTG rail. Built mine on protoboard. Big thanks to OP for the protocol RE, the schematic, and the reference implementation — this thread did the hard part. Happy to share the source / put it on GitHub if there's interest, and curious whether anyone can test against Gold/Silver or other regions but that means having to build the GPIO board yourslef!

I need help with the hidden trainer on a mewtwo on my pokemon y save file. Despite it having my actual OT, TID and SID and the actual real location that you could catch it in it still adds the Handling trainer. It just tells me the following once I remove the specific Handling Trainer “Invalid: GeoLocation Memory: HT Name present but has no previous country.” Man all I want is for the mewtwo to be in my name

I have done all of this on SysCFW while connected to the internet and haven't experienced a ban. I have been using this method since it released.

You'd need to share the exact script you're trying to run. For troubleshooting, it's beneficial to try one line at a time to see your changes stick. Refer to the batch editing guide, and use the current-value indicator to see what value the currently loaded pkm has for a given property.

But even if i use the drop down menu it still ignores every file which is the part that confuses me and which is the reason i need help

Use the drop down menus within the editor. I promise it's not hard to find the properties you are looking to apply.

Thank you very much for your contribution. I’m new to using a modded Switch, so I’d like to confirm a few things. Are all of the steps performed on SysCFW (real system) while connected to the internet? As of now, is your console still able to connect online normally? Also, are there any known cases on the forum where users have been banned for following this method?

I need help with the batch editor and removing the HT on all pokemon in the boxes and only having my personal OT with my TID and SID alongside with the region and subregion of my 3ds

Thank you very much for the quick answer, I was confused since Groudon transfered with no problems

Regarding the Kyogre/Rayquaza/Groudon you have in the save file, it is because the PGF gift you received them from is actually language-locked to Japanese only. Yours are English, which is why they are blocked. Recent commits to PKHeX (less than 24 hours ago) added this receivability check to Gen5 gifts, which now properly flag yours. Could also be them checking shiny, even though it was technically allowed. Probably is the language restriction though. Gen5: add pgf restrictions scraped from card name · kwsch/PKHeX@9ac42ff Your Victini is also flagged on the latest PKHeX commits, because you received it in Black 2. It was only distributed during Black/White era, and could never be received in B2. Same for Genesect and Keldeo. Grab the latest development build if you wanna try testing with these latest improvements. https://projectpokemon.org/pkhex-dev/

I created a shiny living dex in a gen 5 save file, when I try to sent some mons to the bank through the pokétransfer they usually had no problem but today I noticed that Kyogre and Rayquaza get rejected as invalid despite being marked as legal on PkHex. I tried more than one to re-gen those mons but the result is the same. White2_LivingDex.sav

bad idea.

Anyone?

Everything Kaphotics said is 100% correct. I am just adding on one bit of information before I lock this thread. The random tracker you assigned on the mon, then placed into Sword, which then entered HOME, didn't become valid. HOME merely assigned a different tracker cause the existing tracker on it is invalid. It is known that Error 10015 checks don't occur when a mon enters HOME from SWSH. Anyhow, as Kaphotics mentioned, even if HOME accepts this "bypass", yours lack the full paper trail and you're at least risking your own account, not to mention even the entire console. If you don't love the idea of expensive consoles becoming almost mere paperweights, I suggest you stop trying to abuse HOME.

Sword and Shield act as the gateway and thus don't really require a HOME tracker for entering. It's already known, I can't be bothered to dig up a thread post on the forums where it is mentioned, so I'll just rewrite whatever advice it probably contains: Even though you may be able to bypass the initial checks that home does and get assigned a tracker by the server, it does not prevent them from banning the method in the future or banning your account/mons. It's a traceable behavior, as you didn't upload them from Bank, you uploaded them from SWSH, as they'd lack their PK7 data logs on the server. Is it currently un-actioned? Yes. Is it detectable? Yes. Is it safe? No. Note: this bypass only "works" for SWSH, not any other games. To answer your question as to why nobody talks about it: because it's not safe. If HOME can detect it (so too can power users within the Pokemon hacking community), then it should be obvious why it's inadvisable. Champions has not performed any ban waves. Can they? Yep. All data in champions is stored server side, and all foreign data not from recruits or gifts must have passed through HOME, so they have the paper trail too. Yours would lack the full paper trail. An extremely simple ban rule to program if they choose to