formlesstree4 Posted June 28, 2011 Author Share Posted June 28, 2011 There's a socket exception when the GTS is being initialized. This indicates that you have a program running that is using Port 80. That's all I can tell you from just looking at the screenshot. As for the DNS to use, it's in the box that's next to the button that says "Get IP". Link to comment Share on other sites More sharing options...
Metalnix Posted June 29, 2011 Share Posted June 29, 2011 (edited) Hey I love your program mate! I'm just having some trouble with how to send files from the ds to the program. I've been able to send files successfully from my Laptop to the ds so far. If you've already addressed this issue, could you direct me to the correct page? Many thanks. Also, how do i notify people on this site? Edited June 30, 2011 by Metalnix Link to comment Share on other sites More sharing options...
VionDevil Posted June 29, 2011 Share Posted June 29, 2011 how can i get this to work with a 3g connection? Link to comment Share on other sites More sharing options...
evandixon Posted June 30, 2011 Share Posted June 30, 2011 how can i get this to work with a 3g connection? You don't, unless you have a wifi connection along with the 3G connection. Link to comment Share on other sites More sharing options...
Metalnix Posted June 30, 2011 Share Posted June 30, 2011 There's a socket exception when the GTS is being initialized. This indicates that you have a program running that is using Port 80. That's all I can tell you from just looking at the screenshot.As for the DNS to use, it's in the box that's next to the button that says "Get IP". Hey I love your program mate! I'm just having some trouble with how to send files from the ds to the program. I've been able to send files successfully from my Laptop to the ds so far. If you've already addressed this issue, could you direct me to the correct page? Many thanks. Also, how do i notify people on this site? Link to comment Share on other sites More sharing options...
formlesstree4 Posted June 30, 2011 Author Share Posted June 30, 2011 Hey I love your program mate! I'm just having some trouble with how to send files from the ds to the program. I've been able to send files successfully from my Laptop to the ds so far. If you've already addressed this issue, could you direct me to the correct page? Many thanks. Also, how do i notify people on this site? No need to ask the same question twice I don't check this thread daily but I do read it eventually and try to respond to everyone. To send files from the DS, you have to put the program in Receive Mode and let it run. You also might need to run it as Administrator, it should work. Link to comment Share on other sites More sharing options...
Astro86 Posted June 30, 2011 Share Posted June 30, 2011 I was able to start ... believe but I can not send files to the same Link to comment Share on other sites More sharing options...
ZeroManArmy Posted June 30, 2011 Share Posted June 30, 2011 Ports are forwarded. IP is 71.229.150.150 and that is in the box. I am trying the receive option and I get all the spoofing done, but I get the communication error when trying to send to my pc. Any help? Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 1, 2011 Author Share Posted July 1, 2011 (edited) I was able to start ...believe but I can not send files to the same -imgsnip- Ports are forwarded. IP is 71.229.150.150 and that is in the box. I am trying the receive option and I get all the spoofing done, but I get the communication error when trying to send to my pc. Any help? Perhaps a firewall could be blocking the connection? That's the most logical conclusion I can come to right now as I know the connection routines work. That or ya'lls ISP is blocking port 80 and/or 53. Edited July 1, 2011 by formlesstree4 Reason 2 and Image snip Link to comment Share on other sites More sharing options...
ZeroManArmy Posted July 1, 2011 Share Posted July 1, 2011 (edited) Port 80 Port 53 ShinyGTS Startup There is my ports. ShinyGTS Startup. Ports are open for sure. Port Checker says they are. Though it is unable to Ping my Router. No programs are open to block the ports while ShinyGTS is open. When I choose the option to Deposit a Pokemon it says Checking GTS's status... and then goes to the blue screen of Communication error. Please power off. Does that help? Edited July 2, 2011 by ZeroManArmy Link to comment Share on other sites More sharing options...
Chalaka Posted July 2, 2011 Share Posted July 2, 2011 How would I find my local IP? Link to comment Share on other sites More sharing options...
Metalnix Posted July 3, 2011 Share Posted July 3, 2011 @formlesstree4 hey thanks for your reply, I'm pretty raw in this forum to say the least. I have been able to establish a connection, and the DNS and GTS sections chatter like they do when I send Pokemon, but I'm unsure of the method of receiving. After it connects to Shiny GTS correctly, the normal trading system comes up where I offer a Pokemon and select the one I want in return. What is the process I follow here? Sorry to bother you. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 3, 2011 Author Share Posted July 3, 2011 @formlesstree4 hey thanks for your reply, I'm pretty raw in this forum to say the least. I have been able to establish a connection, and the DNS and GTS sections chatter like they do when I send Pokemon, but I'm unsure of the method of receiving. After it connects to Shiny GTS correctly, the normal trading system comes up where I offer a Pokemon and select the one I want in return. What is the process I follow here? Sorry to bother you. No problem. You basically just select the pokemon you want to send and "Deposit" it. The game will say the pokemon was rejected, but in actuality, the file was accepted and written out in the proper folder. Link to comment Share on other sites More sharing options...
Metalnix Posted July 3, 2011 Share Posted July 3, 2011 Hmm I have all the steps good until I've selected a Pokemon to trade, and when it usually would begin to send the pokemon off to the GTS I get a communication error, and the message in my attachment. Is there something I've done wrong that you can see? I've tried this with both Gens, the image below shows the Gen 4 actions. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 3, 2011 Author Share Posted July 3, 2011 Hmm I have all the steps good until I've selected a Pokemon to trade, and when it usually would begin to send the pokemon off to the GTS I get a communication error, and the message in my attachment. Is there something I've done wrong that you can see? I've tried this with both Gens, the image below shows the Gen 4 actions. Ahh hell not that error message again...that usually happens when the communication doesn't go through successfully. All the data wasn't received. There's nothing I can do but suggest that you keep trying. Link to comment Share on other sites More sharing options...
jasterj Posted July 4, 2011 Share Posted July 4, 2011 Port 80 Port 53 ShinyGTS Startup There is my ports. ShinyGTS Startup. Ports are open for sure. Port Checker says they are. Though it is unable to Ping my Router. No programs are open to block the ports while ShinyGTS is open. When I choose the option to Deposit a Pokemon it says Checking GTS's status... and then goes to the blue screen of Communication error. Please power off. Does that help? I have the same problem. I have done everything I can think of. made exceptions in firewall, ran as administrator, made sure ports were forwarded pretty much everything. I was able to receive Pokemon from DS to computer on XP but I now have Windows 7 and its a no go. Any help would be appreciated. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 5, 2011 Author Share Posted July 5, 2011 I have the same problem. I have done everything I can think of. made exceptions in firewall, ran as administrator, made sure ports were forwarded pretty much everything. I was able to receive Pokemon from DS to computer on XP but I now have Windows 7 and its a no go. Any help would be appreciated. I don't know what might've changed in Windows 7. I developed the program on XP and tested it in both XP and 7 without issues (32 bit and 64 bit). I honestly don't know what else to tell everyone that still has issues despite following the general directions. It seems somewhere, maybe the ISP, maybe not, that the connection won't go through. There's nothing else I can really do at this point if it doesn't work. Link to comment Share on other sites More sharing options...
Moony Posted July 6, 2011 Share Posted July 6, 2011 If I use this program, can I put pokemon from Soulsilver on it and then pull them out onto Pokemon black? Link to comment Share on other sites More sharing options...
ZeroManArmy Posted July 6, 2011 Share Posted July 6, 2011 I'll try running it in XP Mode. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 7, 2011 Author Share Posted July 7, 2011 If I use this program, can I put pokemon from Soulsilver on it and then pull them out onto Pokemon black? Technically yes. You would have to convert the Pokemon file from Gen IV to Gen V before hand otherwise you'll have some serious errors. Link to comment Share on other sites More sharing options...
Moony Posted July 7, 2011 Share Posted July 7, 2011 Technically yes. You would have to convert the Pokemon file from Gen IV to Gen V before hand otherwise you'll have some serious errors. Exactly what I was looking for, I don't have two DSes. How would I go about doing this? Link to comment Share on other sites More sharing options...
jasterj Posted July 7, 2011 Share Posted July 7, 2011 I'll try running it in XP Mode. Running the program in xp mode fixed up all my problems. Link to comment Share on other sites More sharing options...
ZeroManArmy Posted July 8, 2011 Share Posted July 8, 2011 Which Service Pack? SP2 or SP3? Link to comment Share on other sites More sharing options...
jasterj Posted July 8, 2011 Share Posted July 8, 2011 Which Service Pack? SP2 or SP3? SP3 did the trick for me. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 9, 2011 Author Share Posted July 9, 2011 Exactly what I was looking for, I don't have two DSes. How would I go about doing this? You could try PokeGen. I don't know of any methods though. I think IR-GTS had some sort of shifter... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now