LilSmooshy

All good mate, appreciate your help.

Just released the ones I used the bot with. caught/bred new ones and moved them up through Bank and into Home. Moved into legends arceus and evolved and moved back to Home. No bot used. Nil issues identified ball present and first met data present, only done this once so far. However appears it would be an issue with the Home tracker being zeroed, maybe there is a Home checker for this if it's aware that the specific mon was moved to game A with this info and moved back to Home with that info altered? When I've checked the ones I used with the bot via PkHex they had been assigned a new Home tracker, which would be normal as they went into Home with that data zeroed by the bot. Maybe Home sees that it's from gen 1-7 so it should have a Home tracker and flags it because it's coming from a gen 9 game without a tracker but should already have one as it would need to have been moved through Home to get there in the first place. Any other mon I've changed from a game never had a Home tracker as it had never been into Home. So it wouldn't matter if that data was zeroed because it was zero to begin with. Odd that nintendo would think this is normal.

That didn't work, I've sent screen shots to the support section via Home and they are of the opinion it's normal. When transferring a Pokémon from the game to HOME some of the information will shown differently, it is by design. Please read this article for more information. Why does Pokémon information display incorrectly or not appear in Pokémon HOME? Hope this answered your question.

They seem to believe clearing the cache on the device will fix the issue. Somewhat doubtful but I'll try later

I'll raise a ticket with HOME, maybe there is bug? I'll try moving one up through bank to home and evolve again in game and see if there is then same issue.

It displays on the switch but neither ball/ first met data on the mobile version . And they are caught in game then evolved in game.

There isn't an issue then?

These are 3 I have removed from Home, when compared to the original the only change (i can see) is the Home Tracker. Just evolved an original scyther in game and moved to Home, same issue, no ball displayed, no first met data.

Here they are. I've pulled more out and they are showing the Home tracker to have changed. I'ts only ones that I 'evolved' using Pkhex, all the ones I evolved in game display fine in Home. I'll pull one out to confirm if the tracker changed on those, however they dont have any display issues in Home.

Would you be so kind to have a look at the Pa8 files? As far as I can tell the PID, HOME Tracker ID and Encryption constant data have not changed. What I did change was level, evolved, EV and GVs that's it. The files pertain to a Ursaring caught in the safari zone of Emerald then transferred to Home then to Arceus to evolve. interesting Pkhex thinks the ball type is wrong for the encounter but that flag goes away once it levels up. I have pulled the ones with the problems from home to compare with original format. On one set the Home tracker has changed which was not by myself.

I've transferred some pokemon from gen 1,2,3,5 to legends Arceus to evolve to regional variants. Once on the switch I traded them via sysbot to pc so I could edit them on PkHex, only level, form and effort levels. When transferred back to the switch and to Home they don't display a Pokeball or first met location on the mobile version but do on the switch version of Home. Pokemon I didn't edit via PkHex and evolved solely in game do not have this issue. Would there be any known causes or anything I could troubleshoot?

Thanks for the information. What is the exception with BDSP gifts?

With not being able to inject wondercards into gen 7 (switch) and 8 how does PkHex generate the PID/data when generating a mon via the .wcfull file? As PkHex is generating the data (from my understanding) would there be any issues with Pokemon Home or transferring? I've noticed some of the downloads include a .pb7 or .pk8; is this a clone of a redeemed wondercard? Thank you

I havent had any issues made a few to test and traded to HGSS to make sure your met details are correct. Here is your dragonite back now legal. Try generator option as apposed to searcher. I prefer to use RNG instead of generating from scratch but thats just me. Making me want to play XD again 149 - DRAGONITE - F22CEE5B361E.pk4

Ive recently completed a living shiny dex for gen 1 & 2 via breeding in gen 2. At the moment im running a lua script/bot to catch some extra shiny Celebi. It's hit or miss how long each one takes. With Gen 1 or 2 not having a PID is there legality issues with changing the IVs to make them shiny? I know Poke Transporter is going to reassign the IV's and give it a PID/EC. Do gen 1 and 2 have a seed they re derived from that wouldn't match if a non shiny was changed to shiny?

I'll keep using Pokefinder. I had no idea RNGreporter was a dropped project. this is from https://www.smogon.com/ingame/rng/emerald_rng_part1 - Does this seem correct? You might notice that, aside from the "A" and "B" values, the IVs generated for bred Pokémon match those generated for method 1 Pokémon. This is because the game uses method 1 to generate the Pokémon's IVs before it replaces them with the pre-set values from the parents. However, there are odd occasions when the game opts to either use a different method from method 1 to generate IVs, or assign "A" and "B" values in a different way. What exactly triggers this event is unknown, but most of the results have been documented. While searching for spreads, you will notice that certain spreads have an "S" after their frame. This means the frame in question is what is known as a "split" spread. Split spreads earn their name because they get the first half of their IVs from the "normal" spread that occurs on that frame, and the second half of their IVs from the spread that follows (the IVs they inherit are taken from the spread that follows). This is due to being created by method 4, rather than method 1. While split spreads occur at the same time as their normal counterparts (for example, 943S occurs at the same time as 943). Split spreads are the most common non-traditional spreads that you will encounter, though there is no known way to hit them consistently, other than through trial and error. Another less common anomaly is the game going into what is known as "Alternate Inheritance" mode. Alternate Inheritance mode causes the IVs inherited by the parents to shift backwards one frame. This means that the IVs passed from the parents on frame 943 when using the vanilla method 1 generation will be inherited on frame 942 in Alternate Inheritance mode. This completely changes what spreads are viable; better spreads may occur with shorter wait times, and different parents than usual. However, Alternate Inheritance mode is very unorthodox in its appearances; when it occurs, it will be the method of IV generation for an indefinite amount of time, liable to disappear without notice. For this reason, it is best not to aim for an Alternate Inheritance spread right away; wait until you see different IVs being inherited to take advantage of it.

One screen shot is without the inheritance and the second is. Another note is the frames are different between RNGreporter and Pokefinder, not by much. But I am getting the same PID with those IV's

You are correct - I was initially using RNGreporter. I then double checked using Pokefinder, which has the option of changing the method. I changed it to 'mixed' and it showed the IV's to match the PID i hit, whereas RNG reporter showed different IV's for that PID. Yes, my initial seed is correct, I make sure i input the new one each time I restart the game as shown in the luascript. The parents always are "the two seem to get along' I double check each time. Is 'mixed method' common, I'm consistently getting it but only when RNG eggs.

The parents aren't legitimate, however they are 'legal'. Would that cause a problem? Edit- On Pokefinder with the method selected as 'mixed' the IV's match.

I'm RNG eggs on gen 3 Fire Red with an emulator with a Luascript to see my frame. I'm using RNG Reporter to find the PID and frame with the initial seed and my TID/SID. I'm hitting my frames and getting the PID for the shiny egg without issues. However I'm noticing the IV's i get are different to what RNG reporter says they should be. The mon is still legal, I'm curious if the emulator is causing this issue, I've never had it before, and it's very consistent when RNG eggs on Fire Red.

There are editors similar to PkHex that allow you still obtain Dream World Pokemon if that's what you're after.

My character is hovering by the wormhole after changing the map coordinates, would you know what i need to change to move?

I've been playing a Korean Rom and it has the ABC option on the trainer name section to change to English text (character name only). I'm only asking as I don't have a legitimate cartridge to compare and I'm getting the Dream World mons which I would like to be "legit".