Thedenskog Posted June 21, 2020 Posted June 21, 2020 Hello i just was wondering if anyone had any news as to why urshifu as well as some others does not appear in the species section on PKHEX after you put in the save file. this a bug? any idea on when its may be patched?
jsalazar Posted June 21, 2020 Posted June 21, 2020 Im having the same issue, my save size is 1.50 MB.
theSLAYER Posted June 21, 2020 Posted June 21, 2020 23 minutes ago, jsalazar said: Im having the same issue, my save size is 1.50 MB. can you upload your save? Also I'm hoping you've at least received the Pokedex.
R a g h u Posted June 21, 2020 Posted June 21, 2020 3 hours ago, Thedenskog said: Hello i just was wondering if anyone had any news as to why urshifu as well as some others does not appear in the species section on PKHEX after you put in the save file. this a bug? any idea on when its may be patched? That's because you are using an older save. Try to create one without loading your previous save and they will show up. 2 hours ago, theSLAYER said: @Thedenskog is your save size 1.44MB? Dude..the save you have uploaded with Isle of Armor (player co-ordinates set in the DLC island) doesn't have any of the Trade/Fly options. Unable to go back to unlock them also. Can you please look into that?
theSLAYER Posted June 21, 2020 Posted June 21, 2020 23 minutes ago, R a g h u said: That's because you are using an older save. Try to create one without loading your previous save and they will show up. that is my present assumption, but we cannot come to that conclusion without the save or the size. Without any proof, it would be just baseless accusation 23 minutes ago, R a g h u said: Dude..the save you have uploaded with Isle of Armor (player co-ordinates set in the DLC island) doesn't have any of the Trade/Fly options. Unable to go back to unlock them also. Can you please look into that? In case you haven't realized, that save is before receiving the starter. The save is not meant to be played; it's meant to hold the mons. (which you can easily transfer to your own save). Also, I have it at IoA, so that anyone interested (and perhaps smart enough) would take the Coordinates block and transplant it into their own save. I mean if everyone has a problem with that, I can always use the original coordinates (back in mainland), and no one will have coordinates to the IoA. Also, you mentioning about it is off-topic from the present topic of conversation. I advise you to not do it again.
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 (edited) My save file is 1.479 KB i have updated the game and created a new save file on my cfw switch. I can put new Pokemon on there like volc and other but not urshifu for some odd reason. I dont have the isle of armor dlc but that should not matter at all should it? as i would just be able to receive these Pokemon from trades. There is a YouTube video showcasing my problem but the solution he came up with didnt even work for me. i would post it but not sure if i have permission to Edited June 21, 2020 by Thedenskog
theSLAYER Posted June 21, 2020 Posted June 21, 2020 6 hours ago, Thedenskog said: My save file is 1.479 KB i have updated the game and created a new save file on my cfw switch. I can put new Pokemon on there like volc and other but not urshifu for some odd reason. I dont have the isle of armor dlc but that should not matter at all should it? as i would just be able to receive these Pokemon from trades. There is a YouTube video showcasing my problem but the solution he came up with didnt even work for me. i would post it but not sure if i have permission to 1.479 KB!? I'm going to assume you're in one of those countries to uses the "." instead of "," as a separator. (1.000 instead of 1,000). Else, 1KB is really small for a save.. In any case, redownload PKHeX (right now), then try it. If you still can't select Urshifu, upload your save here.
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 yep still no luck. Also i meant to say 1,479 KB XD my bad. Heres a screenshot and the save i am using. Thank you for your help btw main
theSLAYER Posted June 21, 2020 Posted June 21, 2020 3 minutes ago, Thedenskog said: yep still no luck. Also i meant to say 1,479 KB XD my bad. Heres a screenshot and the save i am using. Thank you for your help btw main 1.44 MB · 0 downloads It's a 1.44MB save. As such, it's not version 1.2.0 You need a save made in the updated game.. Start the game in the updated 1.2.0 game. Save the game in the updated 1.2.0 game. Then export the updated save. Then load that updated save on PKHeX.
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 hmmm i couldve sworn i did. let me give it another shot. okay i updated the game and it has the same results now the save file is 1,539KB here its ismain My Mistake!!!! I just restarted Pkhex and it now shows urshifu and the others, thank you so much! on a side note i did have 1 other question. Is there any way on getting the pokemon event magearna legal in pkhex, ive been trying
theSLAYER Posted June 21, 2020 Posted June 21, 2020 5 minutes ago, Thedenskog said: on a side note i did have 1 other question. Is there any way on getting the pokemon event magearna legal in pkhex, ive been trying don't create from scratch. import the event one.
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 ah i see it now, but when i go about changing the moves it says some are invalid. calm mind and stored power
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 its lvl 100. heres the set 801-01 - Magearna - 737700000000.pk8
Crassmaker Posted June 21, 2020 Posted June 21, 2020 Have you tried to learn the moves ingame with the TRs and if they still count as invalid? normally, they should be valid.
theSLAYER Posted June 21, 2020 Posted June 21, 2020 Yup, TR moves. Please make sure you have the TRs checked.
Thedenskog Posted June 21, 2020 Author Posted June 21, 2020 oh i see now. got it! Thank you so much for your help!!
stoneddemon Posted June 22, 2020 Posted June 22, 2020 so i noticed on the magearna non color file i grabbed from up there the pid has to be 0 is this an issue or has this worked fine for any others?
Kaphotics Posted June 22, 2020 Posted June 22, 2020 2 hours ago, stoneddemon said: so i noticed on the magearna non color file i grabbed from up there the pid has to be 0 is this an issue or has this worked fine for any others? That's correct; it has a PID of 0. 1
joelzeyro Posted June 23, 2020 Posted June 23, 2020 21 hours ago, stoneddemon said: so i noticed on the magearna non color file i grabbed from up there the pid has to be 0 is this an issue or has this worked fine for any others? do you happen to have the file uploaded anywhere?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now