Chase-san Posted October 8, 2009 Share Posted October 8, 2009 http://www.csdgn.org/files/savhax.7z http://www.csdgn.org/files/savsender.7z Basically yeah, its stuff I compiled/wrote for you people who wanna get your HGSS/save on or off your cart, the savHax is undocumented so I will give a short explination on how it works. The savsender included is a heavily hacked down copy for your enjoyment it also 'should' work. This is all assuming the info I got was globally correct. Its the standard savsender, slot 1 only, friendly. Untested. (hope?) Slot 1 Flashcart: savhax requires some sort of extended ram (3in1, opera ram, etc etc etc). 1. Start savhax. 2. Pull out your flashcart and insert your retail cart. 3. Select "EEPROM --> SRAM" and let it do its thing. 4. Put your flashcart back in the DS. 5. Quickly restart your DS (turn off and then back on) 6. Start savhax again. 7. Select "SRAM --> FILE" 8. Assuming it comes up with the correct size, your done! Slot 2 Flashcart: Not tested.... (not sure if it even works in slot 2 device) 1. Start savhax. 2. Select "EEPROM --> SRAM" and let it do its thing. 3. Select "SRAM --> FILE" 4. Assuming it comes up with the correct size, your done! Link to comment Share on other sites More sharing options...
bear831 Posted October 8, 2009 Share Posted October 8, 2009 (edited) Hey I will test this with my SS game and post back my results. Okay you a very big bug a least for me that is. When I click on NDS EEPROM-- GBA SRAM it says "unsupported EEPROM. Aborting! Press A". But when I click NDS cart info it shows up as: Game ID: Pokemon SS EEPROM: Type: 0 Size: 8192 Extended Data: c00: FF c03: 00 c05: c9F: 00 Edited October 8, 2009 by bear831 Update on data Link to comment Share on other sites More sharing options...
gg132 Posted October 8, 2009 Share Posted October 8, 2009 What i found strange is when i was using my DS Lite and removed my R4 and put in my SS it would restart as if i turned my DS off but when i played i tried it with the original DS it didn't happen. Not sure why. Also im not really sure what this 3in1/opera ram is. Other that that im getting the same problem as the above poster. Link to comment Share on other sites More sharing options...
bear831 Posted October 8, 2009 Share Posted October 8, 2009 3in1' opera are slot two expansion packs that let you backup files to the pack. This is mainly used for GBA emulation and backup/restoring of roms and saves. Link to comment Share on other sites More sharing options...
MarkusE Posted October 8, 2009 Share Posted October 8, 2009 Rein rev 15 and higher also thinks HG/SS is only 8192 bytes. Link to comment Share on other sites More sharing options...
Chase-san Posted October 8, 2009 Author Share Posted October 8, 2009 Game ID: Pokemon SS EEPROM: Type: 0 Size: 8192 Extended Data: c00: FF c03: 00 c05: c9F: 00 Whats the c05 say? Link to comment Share on other sites More sharing options...
gg132 Posted October 8, 2009 Share Posted October 8, 2009 3in1' opera are slot two expansion packs that let you backup files to the pack. This is mainly used for GBA emulation and backup/restoring of roms and saves. Just wanna make sure though. Will i need to buy anything to make this work? Link to comment Share on other sites More sharing options...
Chase-san Posted October 8, 2009 Author Share Posted October 8, 2009 OKAY nevermind, same link. I added a mode in savhax where you can manually select the EEPROM type and Size. HGSS should be Type 3, with a 512 KiB size. Savsender isn't mine originally so I will try and update that later. Link to comment Share on other sites More sharing options...
bear831 Posted October 8, 2009 Share Posted October 8, 2009 (edited) Dang great time for my AK2i's sd slot spring to break..., does anyone know how to fix this? Its fixed, I ripped the cart apart and taped it together. Half of the cart is gone but it works, sort of. Edited October 9, 2009 by bear831 Link to comment Share on other sites More sharing options...
gg132 Posted October 9, 2009 Share Posted October 9, 2009 Let me get this straight(Im really confused atm). I need to buy something like this to get this working? http://www.dealextreme.com/details.dx/sku.1894 Link to comment Share on other sites More sharing options...
bear831 Posted October 9, 2009 Share Posted October 9, 2009 yes that would be correct. The program still won't let me select the card type, How do I do it? Link to comment Share on other sites More sharing options...
Chase-san Posted October 10, 2009 Author Share Posted October 10, 2009 try keeping the cart out of the DS when you goto select EEPROM -> SRAM once the menu comes up, then push it in. (Sorry its a fallback method, I suppose I should of made it easier) Link to comment Share on other sites More sharing options...
ifyfg Posted October 10, 2009 Share Posted October 10, 2009 yeah, when i try to dump it like you said, it says unsupported eeprom, although i am using a 3in1+, i'm not sure if that is supported, but even so, that is the sram not the eeprom. good luck with the program, we are all rooting for you! -edit. Game ID: Pokemon SS EEPROM: Type: 0 Size: 8192 Extended Data: c00: FF c03: 00 c05: c9F: 00 i get this.... Extended data: c00: 3F c03: FF c05: 1F c95: 3F why are the different? i am using ss too... oh, wait everytime i try it i get different results... -edit again. ZOMG. !!!11111one!! i was kind of annoyed that it didn't work, so i kept tapping 'a' as fast as a could whilst pressing my ss cart in and out, and then it just saved it to sram... now i will try to dump it to the sav.. ok, it didn't work, 0 sized sav. ok, i didn't need to eject the cart multiple times, lol.. i got the same result by just tapping 'a' real fast, and this time i got an 8KiB save... ok, i finally got a 256 save, but it was blank with some dots at the end. i also got some -12723434 KiB or something saves, and the program just crashed. so yeah, it does't work for me. Link to comment Share on other sites More sharing options...
bear831 Posted October 10, 2009 Share Posted October 10, 2009 It didn't work it gave me a 8kb save file but it did rip it so that is an improvement. Link to comment Share on other sites More sharing options...
ifyfg Posted October 10, 2009 Share Posted October 10, 2009 well did you open it up in like notepad or something? since if your 8kb save is just blank it is useless, regardless since you can't use it anyway. Link to comment Share on other sites More sharing options...
Chase-san Posted October 10, 2009 Author Share Posted October 10, 2009 need to select type 3, (types 1 and 2 will not work) Link to comment Share on other sites More sharing options...
ifyfg Posted October 10, 2009 Share Posted October 10, 2009 ah ha! mine is currently 'reading sram' after i rebooted it choosing type 3 512kb and ripping it. it has been like this for like 2 mins.. -edit. ok did it and it seemed like everything went perfect, but the save is basically blank. -edit again. yeah, tried it three more times, three 512kb saves that have not much in them. Link to comment Share on other sites More sharing options...
bear831 Posted October 11, 2009 Share Posted October 11, 2009 How do I get to chose the type? Link to comment Share on other sites More sharing options...
ifyfg Posted October 11, 2009 Share Posted October 11, 2009 when you select nds eeprom -> gba sram, make sure there is no ds cart in the slot, and then it will say something, and press a, then choose the options, putting the cart back anytime before selecting 512kb. Link to comment Share on other sites More sharing options...
Chase-san Posted October 11, 2009 Author Share Posted October 11, 2009 If it doesn't work, then some otherwise specialized work needs to be done to work with the carts. Link to comment Share on other sites More sharing options...
ifyfg Posted October 11, 2009 Share Posted October 11, 2009 oh mannn! was it hard to try and make it work for hg/ss? sorry if you spent along time, it would be good if you could test it yourself then you could work out what is the matter, but yeah i assume you can't! anyway, thanks for trying, and i'm not sure if i should say don't give up lol ahah. Link to comment Share on other sites More sharing options...
MarkusE Posted October 11, 2009 Share Posted October 11, 2009 Is anyone in Japan working on this? I imagine there would be quite a big demand for it! Link to comment Share on other sites More sharing options...
whatever Posted October 12, 2009 Share Posted October 12, 2009 i don't know what this tool does, but just forcing save type 3 won't work. special commands need to be executed. Link to comment Share on other sites More sharing options...
Chase-san Posted October 12, 2009 Author Share Posted October 12, 2009 (edited) i don't know what this tool does, but just forcing save type 3 won't work.special commands need to be executed. Your a moron. If you don't know what the tool does then why are you suggesting you know how to fix it? All things considered I already mentioned that may be the case. "If it doesn't work, then some otherwise specialized work needs to be done to work with the carts." But just so you know, saying 'just forcing save type 3' shows how little you really know on the subject. The save type is just how many extra address bytes it needs to write to the carts memory controller to access the entire eeprom. In fact type 3 works for ANY size eeprom, but its a waste of access/write time (considering how slow the cart is) to do so. What probably is the case is that the cart probably requires special initializer data to be written to a specific address before the eeprom can be accessed. Finding this data should be as simple as reverse engineering the rom. (if anyone cares to do my work for me). -- Yes I realize I am biting off this halpless persons head with this post, but honestly the short know-it-all posts people tend to post bother me a great deal. If you want to discuss the topic, your going to have to post more then a "your doing it wrong". Especially if the person who your saying it to already stated that they may be doing it wrong! ---------- Post added at 08:26 AM ---------- Previous post was at 06:37 AM ---------- That 'extended data' I was looking at is explained here: http://nocash.emubase.de/gbatek.htm#dsfirmwareserialflashmemory However the save doesn't seem to follow the standard, so I need to look into it a bit more. c03 tell it to get read to read (there only for completency...) c05 is busy blah blah (not honestly needed I admit) c9F first byte of identifier <-- Important c00 second byte of identifier <-- Important I will maybe try to enable the WEL before reading and see if that helps at all in next version. But I need to get with one of you on irc when you have a few extra hours. Edited October 12, 2009 by Chase-san Link to comment Share on other sites More sharing options...
ifyfg Posted October 12, 2009 Share Posted October 12, 2009 lol i was going to flame them too. i'll pm you about irc if that is cool? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now