SM979 Posted January 25, 2015 Share Posted January 25, 2015 Thanks for the help, guys. It works now! Link to comment Share on other sites More sharing options...
Deducted Posted January 25, 2015 Share Posted January 25, 2015 Edited my post but in case if anyone might still have problems After toying with it a few more times, I advise to not delete the injectiondebug file once you've had it. If you do happen to delete it, or having the problem if not having one appear in your SD card, DELETE THE CODE.BIN FILE AND RE-ADD IT TO YOUR SD CARD. I did this multiple times and I can say it works. If that is mine, the OP used that file to extract my SID. Are you sure it would not cause complications with someone else's save file? How do you extract the SID? I'd like to do the same to mine to figure it out and use it for genning all of my pokes. Link to comment Share on other sites More sharing options...
hmoobtustub Posted January 25, 2015 Share Posted January 25, 2015 Weird...I just tried it without the injectiondebug.bin file and it worked also. Unfortunately, I don't have the expertise to delve into the issue further. Sorry guys. Link to comment Share on other sites More sharing options...
SciresM Posted January 25, 2015 Author Share Posted January 25, 2015 Y'all do realize this is the placebo effect, and that injectiondebug.bin does literally nothing for the program because it is write-only, yeah? I posted my source in the OP... Link to comment Share on other sites More sharing options...
hmoobtustub Posted January 25, 2015 Share Posted January 25, 2015 Y'all do realize this is the placebo effect, and that injectiondebug.bin does literally nothing for the program because it is write-only, yeah?I posted my source in the OP... In that case, thank you any way SciresM. You are freaking awesome. Link to comment Share on other sites More sharing options...
Deducted Posted January 25, 2015 Share Posted January 25, 2015 Weird...I just tried it without the injectiondebug.bin file and it worked also. Unfortunately, I don't have the expertise to delve into the issue further. Sorry guys. Odd. So you manually deleted the injectiondebug without re-adding the code.bin file? I did it like 9 times just to make sure, and it's only worked when I've had the file. The only time it works without it is if I delete the code.bin, the injectiondebug.bin, and pokemon.ekx and re-add code.bin and pokemon.ekx and start fresh. But afterwards, the injectiondebug appears and just stays there. Link to comment Share on other sites More sharing options...
hmoobtustub Posted January 25, 2015 Share Posted January 25, 2015 Odd. So you manually deleted the injectiondebug without re-adding the code.bin file? I did it like 9 times just to make sure, and it's only worked when I've had the file. The only time it works without it is if I delete the code.bin, the injectiondebug.bin, and pokemon.ekx and re-add code.bin and pokemon.ekx and start fresh. But afterwards, the injectiondebug appears and just stays there. Yes. I honestly can't say what it is Link to comment Share on other sites More sharing options...
SciresM Posted January 25, 2015 Author Share Posted January 25, 2015 Injectiondebug.bin is just a file that I create so that I know whether or not my code ran... Link to comment Share on other sites More sharing options...
RockSlicer747 Posted January 25, 2015 Share Posted January 25, 2015 I tried this on both AS and X but it didn't work. I do not know what is going wrong, can anyone help me through this? Link to comment Share on other sites More sharing options...
SciresM Posted January 25, 2015 Author Share Posted January 25, 2015 Please do not discuss Pokemon legality help in this thread. The place for that is here: http://projectpokemon.org/forums/forumdisplay.php?40-Pok%E9mon-Legality Link to comment Share on other sites More sharing options...
Davidslayer Posted January 25, 2015 Share Posted January 25, 2015 I do not work, what should I do? Link to comment Share on other sites More sharing options...
SM979 Posted January 25, 2015 Share Posted January 25, 2015 I do not work, what should I do? Give us more information. Also, when I'm trying to insert my TID, I cannot begin it with a "0". My AS ID is 04162, and I am unable to have the 0 before the 4162 on the editor. Link to comment Share on other sites More sharing options...
RustInPeace Posted January 25, 2015 Share Posted January 25, 2015 First try, it worked! Followed the instructions, rename .ek6 file to .ekx, went to the page on browser, bookmarked it, cleared history and cookies just in case. All this while the wireless was shut off. Turn on after all that, got the browser error, go back in game (where I looked at my boxes and exited), and there's Unbound Hoopa in box 1 slot 1. Brilliant for quick hacks and being content with one at a time. Link to comment Share on other sites More sharing options...
Morgrimm Posted January 25, 2015 Share Posted January 25, 2015 SciresM, what do I have to do to extract my SID from the injectiondebug.bin? It's the only thing I need to complete my pokegenning Link to comment Share on other sites More sharing options...
Cyander Posted January 25, 2015 Share Posted January 25, 2015 Hi. I'm a bit baffled with this. I'm confused about the firmware version I should be using. I'm pretty sure I'm fine with that, as I've been keeping up with the updates. However I can't get this genning to work. I followed the instructions, yet I've still been having trouble. I can explain the steps I took to get here if this helps with troubleshooting. Link to comment Share on other sites More sharing options...
matapatas Posted January 25, 2015 Share Posted January 25, 2015 Download: is the ekx supposed to go onto the root? and also why does PKhex export .ek6 but not a .ekx? Link to comment Share on other sites More sharing options...
matapatas Posted January 25, 2015 Share Posted January 25, 2015 did you put the .ekx file to the root? Link to comment Share on other sites More sharing options...
Deducted Posted January 25, 2015 Share Posted January 25, 2015 is the ekx supposed to go onto the root? and also why does PKhex export .ek6 but not a .ekx? Yes, the ekx goes in the root. As for why PKHeX exporting .ek6 only, I have no idea but if you save it under 'All Files' you should be able to save it as .ekx without the need to rename it. Link to comment Share on other sites More sharing options...
matapatas Posted January 25, 2015 Share Posted January 25, 2015 Yes, the ekx goes in the root. As for why PKHeX exporting .ek6 only, I have no idea but if you save it under 'All Files' you should be able to save it as .ekx without the need to rename it. ok thank you for clarifying Link to comment Share on other sites More sharing options...
matapatas Posted January 25, 2015 Share Posted January 25, 2015 will this work on a regular 3ds? Link to comment Share on other sites More sharing options...
RockSlicer747 Posted January 25, 2015 Share Posted January 25, 2015 So here is what I am doing, tell me if I am doing anything wrong 1. Downloaded the file and put it on my SD Card 2. Make a Pokemon on PKHex and used the All Files option to save it as pokemon.ekx 3. Put my SD Card into my 3DS 4. Went into browser and cleared everything, and saved the LoadCode as a Bookmark 5. Went into AS/X and went into the Box to check, and then left the PC 6. Went to browser and went to the Link, and then it crashes (One thing I notice on SciresM video is that he got a gray bar on the top of the browser before it crashed, I didn't get that) 7. Went into AS/X and check the PC but I got nothing in there Please help. Link to comment Share on other sites More sharing options...
RockSlicer747 Posted January 25, 2015 Share Posted January 25, 2015 will this work on a regular 3ds? This should work with everything but the New models Link to comment Share on other sites More sharing options...
Cyander Posted January 25, 2015 Share Posted January 25, 2015 So here is what I am doing, tell me if I am doing anything wrong1. Downloaded the file and put it on my SD Card 2. Make a Pokemon on PKHex and used the All Files option to save it as pokemon.ekx 3. Put my SD Card into my 3DS 4. Went into browser and cleared everything, and saved the LoadCode as a Bookmark 5. Went into AS/X and went into the Box to check, and then left the PC 6. Went to browser and went to the Link, and then it crashes (One thing I notice on SciresM video is that he got a gray bar on the top of the browser before it crashed, I didn't get that) 7. Went into AS/X and check the PC but I got nothing in there Please help. This is the same as I'm doing, yet it doesn't work. I heard you're supposed to take the file out of the zipped folder? Link to comment Share on other sites More sharing options...
matapatas Posted January 25, 2015 Share Posted January 25, 2015 This should work with everything but the New models yeah because im not getting it to work, i did all the things perfectly Link to comment Share on other sites More sharing options...
SciresM Posted January 25, 2015 Author Share Posted January 25, 2015 This is the same as I'm doing, yet it doesn't work.I heard you're supposed to take the file out of the zipped folder? You need to unzip the file so that you have code.bin at the root of your SD and not code.zip, yes. Try connecting to the website through . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now