WSR Posted March 22, 2020 Posted March 22, 2020 Hello, I use the latest version of PKHex (20200314) But he gives the same error over and over: --------------------------- Error --------------------------- Attempted to load an unsupported file type/size. This could be caused by loading a different generation Pokemon file on an unsupported generation or your file is corrupt. File Loaded: D:\Desktop\新建文件夹\fd1\main File Size: 1513822 bytes 1513822 bytes (0x17195E) --------------------------- 确定 --------------------------- I read many topics here but i can't find the answer. Hopefully someone can help me to fix this. I use a save file of Pokemon Sword main1 main2
theSLAYER Posted March 22, 2020 Posted March 22, 2020 3 hours ago, WSR said: Hello, I use the latest version of PKHex (20200314) But he gives the same error over and over: --------------------------- Error --------------------------- Attempted to load an unsupported file type/size. This could be caused by loading a different generation Pokemon file on an unsupported generation or your file is corrupt. File Loaded: D:\Desktop\新建文件夹\fd1\main File Size: 1513822 bytes 1513822 bytes (0x17195E) --------------------------- 确定 --------------------------- I read many topics here but i can't find the answer. Hopefully someone can help me to fix this. I use a save file of Pokemon Sword main1 1.44 MB · 4 downloads main2 1.44 MB · 2 downloads I don't think save files should be like this. Having the lines of 0xFF and a visible "USBC" is not normal, and not what a SWSH save file looks like. How did you obtain such a save file again? edit: It looks like the bytes from 0x200 onwards might contain data for a save file, but trimming this file is useless, as it was cut off at the address where the save file would have ended. Since this file is padded with 0x200 of nonsense, but the file ends at the correct spot, that means the theoretical "actual save portion" in the file is smaller than normal. With that in mind, the save cannot be decrypted properly, even if we remove the padding. So once again, how are you obtaining this "save" file?
WSR Posted March 23, 2020 Author Posted March 23, 2020 8 hours ago, theSLAYER said: I don't think save files should be like this. Having the lines of 0xFF and a visible "USBC" is not normal, and not what a SWSH save file looks like. How did you obtain such a save file again? edit: It looks like the bytes from 0x200 onwards might contain data for a save file, but trimming this file is useless, as it was cut off at the address where the save file would have ended. Since this file is padded with 0x200 of nonsense, but the file ends at the correct spot, that means the theoretical "actual save portion" in the file is smaller than normal. With that in mind, the save cannot be decrypted properly, even if we remove the padding. So once again, how are you obtaining this "save" file? After modifying the save, I clicked save main and overwrite the save before modification
theSLAYER Posted March 23, 2020 Posted March 23, 2020 Just now, WSR said: After modifying the save, I clicked save main and overwrite the save before modification You did not say anything about the save file being one that has modification done to it. How did you obtain the original save file then? Can the original be opened by PKHeX? When you modify it, is the save file location on your computer, or was the saving done via USB-C connected to the Switch?
WSR Posted March 23, 2020 Author Posted March 23, 2020 5 minutes ago, theSLAYER said: You did not say anything about the save file being one that has modification done to it. How did you obtain the original save file then? Can the original be opened by PKHeX? When you modify it, is the save file location on your computer, or was the saving done via USB-C connected to the Switch? I obtained the original save file by Checkpoint on swith. The original can be opened by PKHeX. When i modify it, the save file location was on my computer
theSLAYER Posted March 23, 2020 Posted March 23, 2020 8 minutes ago, WSR said: I obtained the original save file by Checkpoint on swith. The original can be opened by PKHeX. When i modify it, the save file location was on my computer you mind telling me what specific modifications you done that caused the error. I'll see if I can recreate it.
WSR Posted March 23, 2020 Author Posted March 23, 2020 7 minutes ago, theSLAYER said: you mind telling me what specific modifications you done that caused the error. I'll see if I can recreate it. The box is full of eggs,i just deleted some eggs arround the shiny one
theSLAYER Posted March 23, 2020 Posted March 23, 2020 @Kaphotics I'm out of clues, unable to replicate the issue, need your help.
theSLAYER Posted March 23, 2020 Posted March 23, 2020 27 minutes ago, Kaphotics said: This isn't PKHeX's fault. User says it only happens after modifying tho
MASTER RUDRA Posted November 19, 2020 Posted November 19, 2020 @how do i hak HEY! HAVING SAME ISSUE WITH ULTRA MOON .. I HAVE DOWNLOADED LATEST VERSION OF PKHex BUT BRO FIRST I DOWNLOADED IT THREE TIMES BECAUSE IT WAS SAYING FATAL ERROR THEN SOME KINDA MAGIC HAPPENED AND THEN PKHex OPENED BUT HOWEVER IT SAID TO THE SAVE FILE THAT I LOADED { UNSUPPORTED FILE TYPE SIZE } I HAVE ATTACHED THE MAIN FILE BELOW PLEASE!!!!!!!! HELP ME OUT MY TIGERS. IF ANY SOLUTION TELL ME QUICK main
theSLAYER Posted November 19, 2020 Posted November 19, 2020 @MASTER RUDRA First of, tagging me and PMing me is unnecessary. Being demanding makes people not want to help you. Typing in all caps does not help your case. I've deleted the unnecessary double post. I'm giving you one chance to correct your behaviour. You are the problem. You're presumably using an outdated version of PKHeX. Your save loads fine for me. Now I'll repeat this again. Stop typing in all caps and PMing me. 1
theSLAYER Posted November 19, 2020 Posted November 19, 2020 edit @MASTER RUDRA you've sent me another PM saying you reinstalled PKHeX. Mind showing me a screenshot of the PKHeX page? edit again: Is the save on your Desktop, or you reading from a SD card? 1
MASTER RUDRA Posted November 19, 2020 Posted November 19, 2020 As you can see sir,, the error....................... In the last picture i want to show that after all these steps a page like thing comes and it comes every time sir and by the way i am using window 7 as it told you earlier sir. This is now in public place
theSLAYER Posted November 19, 2020 Posted November 19, 2020 1 minute ago, MASTER RUDRA said: How sir can you tell me steps The steps are same as how you attached your save earlier. 1
MASTER RUDRA Posted November 19, 2020 Posted November 19, 2020 That is not save file it is a error icon that comes after opening pkhex sir
theSLAYER Posted November 19, 2020 Posted November 19, 2020 You know you can attach non save files to the posts, right? It's a text file. Attach the text file for the error report. If you won't even do that, then I doubt I will be able to help you. 1
MASTER RUDRA Posted November 19, 2020 Posted November 19, 2020 Is that all i have to do sir PKHeX_Error_Report 20201119164914.txt
theSLAYER Posted November 19, 2020 Posted November 19, 2020 1 minute ago, MASTER RUDRA said: Is that all i have to do sir PKHeX_Error_Report 20201119164914.txt 1.4 kB · 1 download For now, please install .NET Framework 4.6, then try again.
MASTER RUDRA Posted November 19, 2020 Posted November 19, 2020 .NET Framework 4.6, I TRIED IT BUT IT IS FOR WINDOWS 8.1 , 8 , 10
theSLAYER Posted November 19, 2020 Posted November 19, 2020 Just now, MASTER RUDRA said: .NET Framework 4.6, I TRIED IT BUT IT IS FOR WINDOWS 8.1 , 8 , 10
theSLAYER Posted November 19, 2020 Posted November 19, 2020 1 minute ago, MASTER RUDRA said: which website are you on the official one. a simple google search: https://www.microsoft.com/en-us/download/details.aspx?id=48130
Recommended Posts