Schiffy94 Posted November 12, 2012 Posted November 12, 2012 I haven't tried on DeSmuME, mainly because I've never really liked using DS emulators on my computer, which is why I went and bought an AceKard in the first place. And do you know if it's possible to completely remove the old legends from appearing on a 1.00 sav, or is it completely impossible to change? And one final thing, I noticed (and I don't know if this has been change in 1.1) that the Big Stadium/Little Court trainers are no longer useful for training due to your level curve. I feel that they should be little tougher, so that anyone who finds themselves just a little under-leveled for a gym can use them for training.
Drayano Posted November 12, 2012 Author Posted November 12, 2012 Ah, yeah, that's understandable. I'd just like you to give it a try to see if it'll boot. If it does, then it's probably an issue with your AKAIO settings rather than the game. It's impossible for me to do, I'm afraid, short of adding in an NPC that sets all the flags again. But then people would start doing it by accident, and it all gets very confusing. @_@ I never got around to editing the dome trainers, mainly because I didn't have a proper trainer editor. I'll probably do those up once I get a good tool, although to be honest I have never found myself needing to use the domes.
Schiffy94 Posted November 12, 2012 Posted November 12, 2012 Yeah, the new patch isn't even working with DeSmuMe. So it seems my AKAIO settings (which can run 1.00 perfectly fine) are not the problem. That legend thing kinda sucks. But I'm probably just gonna ignore the legends until the point in the game that they're actually supposed to appear anyway, so no harm no foul. (level 65 Meloetta before the 4th badge? I'd get my ass handed to me on a silver platter!) And I've found, with the difficulty of BB2 in challenge mode, Gym Leaders can be really tough (making it more fun, of course), so really any semi-tough battles help. Of course, there's always the Hoenn Leaders.
Drayano Posted November 12, 2012 Author Posted November 12, 2012 Hmm, I see. That's odd... people over at GBAtemp seem to have successfully got the Black 2 and White 2 patches working. Which version are you trying, actually? I assume Blaze Black given your post mentions BB2. It might be worth giving Volt White a try... I'm more confident in the patch for that one (Black 2 base roms seem harder to find) and your save file will work with both. And yeah, ignoring legendaries is probably your best bet for now.
OmegaGenda011 Posted November 12, 2012 Posted November 12, 2012 hey drayano, your hacks are good, and this one specially, anyways, i've been trying to load version 1.1 on dstt but i can't get it working, it gives me the error code 4....and i can't seem to find any (useful or specific) tutorials on google....
Drayano Posted November 12, 2012 Author Posted November 12, 2012 I think DSTT just doesn't work because RFG's firmware hasn't updated for it yet.
MarbleZone Posted November 12, 2012 Posted November 12, 2012 Those of you with the issue, I've updated the patch link. The White 2 patch had some sort of mix-up. Not sure about Black 2 but apparently it can work.nicoelson - You won't actually be able to see Heatran but it'll be the tile behind Groudon, so you can still talk to it. It's just out of view because Groudon is quite large. Everything is working properly now on Desmume, both BB2 and VW2! Thanks a bunch!
Schiffy94 Posted November 12, 2012 Posted November 12, 2012 Strange thing though, VW2 wasn't working for me with Patch 1.00, so I'm not sure if 1.1 will work. Frankly, finals are more on my mind right now, so I think I'm gonna stick with 1.00 until I have less on my plate.
boogie Posted November 12, 2012 Posted November 12, 2012 is there any way i can patch bb2 on my hacked rom? i only changed moves.
Sathyro Posted November 12, 2012 Posted November 12, 2012 When are you going to release the 'full' version with 1.1? Soon?
Drayano Posted November 12, 2012 Author Posted November 12, 2012 boogie - You won't be able to put the patch directly on top I'm afraid. Sathyro - Uh, it's already out ?_? That's the complete version.
OmegaGenda011 Posted November 12, 2012 Posted November 12, 2012 hey, retro released the latest update of his firmware, but when i load blaze black 2 it still gives me error code 4....what i can do now?
boogie Posted November 13, 2012 Posted November 13, 2012 i believe the latest RGF's patch is for 1.0. you probably should wait new patch for 1.1.
Sathyro Posted November 13, 2012 Posted November 13, 2012 Sorrym, my english sucks D: I mean... a rom already patched, or isnt that possible? Cause i'm a retard and i don't know how to patch it.
Drayano Posted November 13, 2012 Author Posted November 13, 2012 Yeah, you'll have to wait for RFG. Oh, right. You'll have to check one of my other sites...
Sathyro Posted November 13, 2012 Posted November 13, 2012 Yeah, you'll have to wait for RFG.Oh, right. You'll have to check one of my other sites... You'll post it on youtube?
Drayano Posted November 13, 2012 Author Posted November 13, 2012 What if I said, it might already be there?
AlexisSanchezMadrid Posted November 13, 2012 Posted November 13, 2012 AR codes working for these versions, please!
Drayano Posted November 13, 2012 Author Posted November 13, 2012 The Game ID is in the AR document, as well as some codes. All B2/W2 codes will work for these, though.
bolt.pt Posted November 13, 2012 Posted November 13, 2012 I noticed that in the Wild Pokemon List doc, the Relic Castle upper floors % numbers are off. First of all, "Sand, Normal, 1F" adds to 90% and not 100%, and the "Sand, Normal, B1F" adds up to 94%. Thing is, in around 300 encounters I've never encountered a Larvesta in B1F, is it really there in the encounter table? Especially at the supposed 4% rate, I think there's something off about that. edit: At around 400 encounters I found one, finally. At least I know it's in the table, but the values are certainly off.
alan_gp Posted November 14, 2012 Posted November 14, 2012 How do i use the new patch tool? It's showing an error... "Patch" is the patch, of course; "Source File" is the base rom, i believe; and "Output File", is what?
Giovanni Boss Posted November 14, 2012 Posted November 14, 2012 I noticed that in the Wild Pokemon List doc, the Relic Castle upper floors % numbers are off. First of all, "Sand, Normal, 1F" adds to 90% and not 100%, and the "Sand, Normal, B1F" adds up to 94%.Thing is, in around 300 encounters I've never encountered a Larvesta in B1F, is it really there in the encounter table? Especially at the supposed 4% rate, I think there's something off about that. edit: At around 400 encounters I found one, finally. At least I know it's in the table, but the values are certainly off. Or maybe you're just unbelievably unlucky.
The_Stars_Alchemist Posted November 14, 2012 Posted November 14, 2012 (edited) Amazing hack, as usual. Anyway, I would like to give a few suggestions... 1. How about adding Togepi in Floccesy Ranch? You know, it's an egg and stuff... Plus, it's always awesome to have a Togepi in a journey's beggining, like in Spirit Gold (Violet City) and Blaze Black (Dreamyard) 2. I see that there's a lot of controversy regarding Emboar's. So, why do'nt you offers a third version, where its type is changed? This will also allow you to make changes in other types, since you couldn't make them in BB1VW1. 3. You are far too creative to just throw a lot of legendaries into the same location! I admit that I don't have any idea of how coding works, so there might be a reason for you to place 8 Pokemons in the same place. But, if that's the case, just do it like you've done in BB1VW1! Insert the legendaries within specific routes, with a tiny chance to find them. But, still, it would be awesome if Lugia was in Seaside Cave, Rayquaza was in Skyarrow Bridge and Meloetta in Village Bridge... Thank you! Edited November 15, 2012 by The_Stars_Alchemist
Giovanni Boss Posted November 14, 2012 Posted November 14, 2012 I'd like to thank you for such hard work. I just recently beat Black 2 and was so very glad to find Blaze Black also had a 2. I'm still reading the documentation, but so far the changes seem better then the first BB/VW. I do miss Flygon's high base special attack, though. I thought you'd give it 100 base satk. I really liked what you did with Farfetch'd this time, even though I don't use it. The changes in general seem more moderate, with more of a "professional" air around them. I would like to make some suggestions, if you don't mind, though. Just something I changed myself back in blaze black when I played it. Adding Sacred Sword to Absol, since he actually has a horn and uses it as a sword. Making Seviper Poison/Dragon. I also enabled it to learn Surf and boosted a bit its stats and Zangoose's, mainly their speed. Also, i think I gave the snake dragon dance and something to Zangoose to compensate, can't really recall. Think I changed his ability to Poison Heal... Yeah, that was it. Changing Cute Charm for Huge Power in Lopunny. Oh, that was a killing machine. Also I really think it fits. Making Charizard Fire/Dragon with Blaze/Levitate. I kinda love this typing and also dislike using Legends, so this is the closest to a Reshiram I could get. Las thing I remember is something I didn't change, but thought about changing quite a few times: Making Porygon-Z a Normal/Ghost poké. It seems to fit him so well... Guess these are all changes I made worth mentioning. There were others, such as Aura Sphere Roserade, but this one has no actual sense, the idea was just to make my favorite pokémon better.
Muppen Posted November 14, 2012 Posted November 14, 2012 i have dstwo and playing this game. But i get random freeze in Pokemon world tournament
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now