Jump to content
WonderSquid

Wonder Trade Bot Won't Trade Anything

Recommended Posts

Running a Wonder Trade bot with Pokemon Moon. It gets as far as selecting a Pokemon to trade, and then cancels, and then selects it again, and then cancels, and then selects it again...

The noise is starting to get irritating and it's been doing this for fifteen minutes with no end in sight. My log looks like this, if it helps:

NTR: Touch screen command sent correctly
Bot: Test if pokemon is selected
NTR: Read pokémon data at offset 0x30000298
packet: cmd = 9, dataLen = 232
NTR: Read sucessful - PID 0x2183D3AA
Bot: Picked incorrect pokemon
Bot: Cancel selection and check again
NTR: Read pokémon data at box 17, slot 2
packet: cmd = 9, dataLen = 232
NTR: Read sucessful - PID 0x2183D3AA
NTR: Send button command 0xFFD
NTR: Button command sent correctly
Bot: Touch pokémon
NTR: Touch the screen at 60,70
NTR: Touch screen command sent correctly
Bot: Test if pokemon is selected
NTR: Read pokémon data at offset 0x30000298
packet: cmd = 9, dataLen = 232
NTR: Read sucessful - PID 0x2183D3AA
Bot: Picked incorrect pokemon
Bot: Cancel selection and check again
NTR: Read pokémon data at box 17, slot 2
packet: cmd = 9, dataLen = 232
NTR: Read sucessful - PID 0x2183D3AA
NTR: Send button command 0xFFD
NTR: Button command sent correctly
Bot: Touch pokémon
NTR: Touch the screen at 60,70
NTR: Touch screen command sent correctly
Bot: Test if pokemon is selected
NTR: Read pokémon data at offset 0x30000298
packet: cmd = 9, dataLen = 232
NTR: Read sucessful - PID 0x2183D3AA
Bot: Picked incorrect pokemon
Bot: Cancel selection and check again
NTR: Read pokémon data at box 17, slot 2

Except way way longer. 

Share this post


Link to post
Share on other sites

I'm connected to the internet, standing next to where the most recently interacted with Guest is to make the whole collecting FC bit easier. It boots up Wonder Trade properly, selects a Pokemon, and then unselects it, and then selects it again, repeat ad nauseum. I've checked whether or not it's a legality issue with a random Exeggutor I caught, and it won't trade that either. 

For some reason it will trade Pokemon I have just now received from Wonder Trade, and nothing else. Pokemon I've received from previous Wonder Trade sessions are ignored, so it's not an ID number thing either. 

Edited by WonderSquid

Share this post


Link to post
Share on other sites

 

12 minutes ago, WonderSquid said:

I'm connected to the internet, standing next to where the most recently interacted with Guest is to make the whole collecting FC bit easier. It boots up Wonder Trade properly, selects a Pokemon, and then unselects it, and then selects it again, repeat ad nauseum. I've checked whether or not it's a legality issue with a random Exeggutor I caught, and it won't trade that either. 

For some reason it will trade Pokemon I have just now received from Wonder Trade, and nothing else. Pokemon I've received from previous Wonder Trade sessions are ignored, so it's not an ID number thing either. 

What are your settings? And what version are you using?

Share this post


Link to post
Share on other sites

I'm running 11.5 firmware, and 3.4 of PKMN-NTR. Moon is properly updated as well. I have Collect FC checked, though I've tried it without this with the same results. Right now I'm trying to trade box contents, but I've also tried loading from the Wonder Trade folder, and nothing changes with that either. I don't have it on Run Endlessly mode, but I don't know how much difference that would make since it pretty much won't run at all. 

Edited by WonderSquid

Share this post


Link to post
Share on other sites

 

23 minutes ago, WonderSquid said:

I'm running 11.5 firmware, and 3.4 of PKMN-NTR. Moon is properly updated as well. I have Collect FC checked, though I've tried it without this with the same results. Right now I'm trying to trade box contents, but I've also tried loading from the Wonder Trade folder, and nothing changes with that either. I don't have it on Run Endlessly mode, but I don't know how much difference that would make since it pretty much won't run at all. 

And you have InputRedirection also right?

P.S. Run Endlessly mode will endlessly run from one slot

Share this post


Link to post
Share on other sites

Yes, it's installed on my 3DS and I'm running the client on my computer as well. 

I've even tried with InputRedirection off, and it seems to make no difference. 

I'm trying out the 3.5 beta right now. No difference with that either. 

Share this post


Link to post
Share on other sites

I don't know. This is the first I've heard of any Sun and Moon-specific patch, and Google isn't telling me much. I haven't noticed any connection errors. It seems to be a problem with the bot itself just repeatedly selecting and unselecting the same Pokemon until it crashes half an hour later. 

Edited by WonderSquid

Share this post


Link to post
Share on other sites
21 minutes ago, WonderSquid said:

I don't know. This is the first I've heard of any Sun and Moon-specific patch, and Google isn't telling me much. I haven't noticed any connection errors. It seems to be a problem with the bot itself just repeatedly selecting and unselecting the same Pokemon until it crashes half an hour later. 

Huh, that's weird because it's works perfectly for me. Try to send a issue to the official GitHub and see what happens.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...