Help Extraxting The Sav of The Virtual Console Version Of R/B/Y

[Blu_MC]

Well, basically, I need to know how to extract the sav (backup) of the VC version of these games..... I tried with SavManager but it gets freezed in a Red sreen.:confused: is there another homebrew app for it?:frown:

[suloku]

Without custom firmware you can't.

NinjHax 2.7 will probably offer support for 9.6+ encryption, so if you can't access custom firmware, wait for ninjhax 2.7.

[Blu_MC]

Without custom firmware you can't.

NinjHax 2.7 will probably offer support for 9.6+ encryption, so if you can't access custom firmware, wait for ninjhax 2.7.

I´m on CFW Rxtools with 10.6

[suloku]

So, use jksavemanager.

Also, you might be interested in ghbank.

[Blu_MC]

So, use jksavemanager.

Also, you might be interested in ghbank.

Thanks so much buddy, by the way

What is ghbank anyway? I googled it for info but nothing useful, can you explain and or link me to it?

[suloku]

Sorry, correct name is phbankgb:https://gbatemp.net/threads/wip-phbankgb-pokémon-homebrew-bank-gb-r-b-y.418440/

[Mr. ZARDE]

Will there it be a 3dsx version of this or i'll just have to wait for hax 2.7?

Enviado de meu SM-J200BT usando Tapatalk

[suloku]

There's actually a unnofficial hax 2.7 that works with the VC titles: http://ihaveamac.github.io/ninjhax2.x/

It's been out for a week, I discovevered it two days ago I think. I haven't personally tried it, but it has been reported by multiple people to work.

ps: make sure you read the instructions in the webpage for correct usage.

[Mr. ZARDE]

But Oot3d hax ran hax 2.6 gamma AFAIK... I'm afraid it'll just freeze upon launching the VC Games. Any Thoughts?

[Pikm]

But Oot3d hax ran hax 2.6 gamma AFAIK... I'm afraid it'll just freeze upon launching the VC Games. Any Thoughts?

You have to run ihaveamac's boot.3dsx. It loads the xml files that bypass the 9.6 crypto

Sent from my LGLS990 using Tapatalk

[Mr. ZARDE]

Just replacing current boot with ihaveamac's one will do the trick? I'm on an 2ds TBH.

Enviado de meu SM-J200BT usando Tapatalk

[suloku]

No, if you use OOT3D hax you will need to manually change the payload in the OOT3D savegame.

If this is your only entrypoint and you don't have access to any other method to re-install OOT3Dhax I suggest to way until official release and installer, since if you mess up you'll lose homebrew until a new entripoint is available to you.

[Mr. ZARDE]

Agreed. I Got it to Work Anyhow. No Need For My 2DS anymore!