Way Turner

You may try to contact your ISP and asking them why its not working when your ports are open. They maybe occur that.

Read what l wrtoe above sry for the confusing that is for non pub distro.

Ok try restart the Shiny GTS and check in the taskbar to right with a arrow up make sure you closed all shinyGTS.exe then start it up again and use www.portforward.com to obtain external IP.

Hmm try use your local IP if you don't want anyone else to connect to it (also only you) You can find your local IP on Windows by go Start Menu > Control Panel > Network and Internet > Network and Sharing Center > Click on your connection (below the internet globe) > Details > use IPv4 Adress

Party Pokemon is it you selected? Do you want to make a public distro or a private for you only?

Oh yeah but l find PokeGen as the most simple and user friendly program but whichever you prefer to use. Bytes yes.

Well then download PokeGen 3.0b24 http://projectpokemon.org/forums/showthread.php?6424-Download-link-and-information and open the pkm file with it and then save the file as 236 Kb

l just tried myself and its working fine, Well HyperGTS only works for 4th Gen and ShinyGTS works for both generation depend on which you have set but make sure your .pkm files is 236 kilobyte (5th Gen Party Pokemon Files) try running 4th gen files with 5th gen mode won't work. If you need to convert your files to 5th Gen download this: http://projectpokemon.org/forums/showthread.php?14371-Pok%E9-Transfer&highlight=Poke+Transfer

Ok, Try run a connection test from the settings and make sure the DNS is on and GTS aswell on the program. If its not working then may you posted a screenshot when you run port 80 and 53 in the port checker and l can see what l can do about it. Edit: Also make sure you run no Skype or any other program that block port 80.

Where do you encounter the problem?

Well the IP you have on ShinyGTS should be on your primary DNS on the WiFi DS settings too either it won't find your DNS server. Other question "Could the portchecker ping your ports?"

Let me ask a few questions Do you have any .pkm files in your Gen V folder? Do you have set the IP same on DS as in the Shiny GTS? Do you have a firewall on? Note: It looks like the port 80 is open but to make sure 53 and 80 is open for traffic, use this port checker; http://portforward.com/help/portcheck.htm

l see, that is a good idea PM me a link and l be more than happy to support users of ShinyGTS.

Hi, formlessless4 l just installed the Python and IR-gts working fine would it be possible for us to try again and run it on my iMac l think it should work now in the terminal. Hit me up through the chat or tell me when you're on. Thanks in advance

Do you have msn/yahoo? if so l could help you out with direct support. Either its kinda hard to explain... My msn: frille-95@hotmail.com

Start DNS first then make sure it says something with port 80 then select the file and chose if GEN IV/V and select mode "Individual Pokemon Sending" and Start GTS and make sure you have your DS done then contact to the GTS as normally but if you using GEN V use the first GTS at top when you talk to the women to right. Not "GTS Negotiations" ~ Enjoy

No, that is your local IP try this site: http://portforward.com/ it will say your external/public IP adress. Make sure your port 80 is forwarded/open by checking your router/DSL settings. You can download a PortForward checker right here: http://portforward.com/help/portcheck.htm Check port 80 in it. Right below that you readed :=) How can I use them? Step 1) Make sure no programs are currently running that can block Port 80 [TCP] AND Port 53 [uDP] Step 2) Now, make sure your Router has the two ports listed in Step 1 forwarded to your local IP. This is crucial if you want to do public distributions. [if you don't want to do public distributions, you can skip this step]. Step 3) Make sure any active firewalls have an exception for either ShinyDTS and/or ShinyGTS on both ports listed in Step 1. Step 4) Run either program and follow the interface instructions. Step 5) On your DS [in either game], be sure to change your first connection properties [which is your active one] ONLY! Do not create a new connection for this. You need to change "Auto-Obtain DNS" to "No", and change the "Primary DNS" slot to the IP address that ShinyDTS and/or ShinyGTS display in the textbox on the program. [if you skipped Step 2, then you must use your local IP address assigned to your computer by your router, no exceptions]. Step 6) You can now send or receive Pokemon! If you need more help feel free to ask if l cannot help probably formlesstree4/Shiny Jirachi might be around

Yes, that is right the one with ShinyGTS should match the DNS one (your public IP)

Sure - l be on there in a few minutes.

Funny, huh?

It's not working if you read the log l just posted above. "There is no such file or directory" Ok l may get a time with Shiny Jirachi so he can review that mono application.

My-name-iMac:~ myname$ "cd Users/myname/Downloads/ShinyGTS" -bash: cd Users/myname/Downloads/ShinyGTS: No such file or directory My-name-iMac:~ my name$ cd Users/myname/Downloads/ShinyGTS -bash: cd: Users/myname/Downloads/ShinyGTS: No such file or directory My-name-iMac:~ my name$ mono ShinyGTS.exe Cannot open assembly 'ShinyGTS.exe': No such file or directory. My-name-iMac:~ myname$ Users/myname/Downloads/ShinyGTS -bash: Users/myname/Downloads/ShinyGTS: No such file or directory My-name-iMac:~ myname$ Soon l get sad about this little thing that doesn't want to work....is there a teamviewer for mac?

mono "/Users/myname/Downloads/ShinyGTS/ShinyGTS.exe" l tested this also without quotes nothing seems to work Any idea?

It just tell me its incorrect and no such file in that directory l have it in.

Development: --aot[=<options>] Compiles the assembly to native code --debug[=<options>] Enable debugging support, use --help-debug for details --debugger-agent=options Enable the debugger agent --profile[=profiler] Runs in profiling mode with the specified profiler module --trace[=EXPR] Enable tracing, use --help-trace for details --jitmap Output a jit method map to /tmp/perf-PID.map --help-devel Shows more options available to developers Runtime: --config FILE Loads FILE as the Mono config --verbose, -v Increases the verbosity level --help, -h Show usage information --version, -V Show version information --runtime=VERSION Use the VERSION runtime, instead of autodetecting --optimize=OPT Turns on or off a specific optimization Use --list-opt to get a list of optimizations --security[=mode] Turns on the unsupported security manager (off by default) mode is one of cas, core-clr, verifiable or validil --attach=OPTIONS Pass OPTIONS to the attach agent in the runtime. Currently the only supported option is 'disable'. --llvm, --nollvm Controls whenever the runtime uses LLVM to compile code. --gc=[sgen,boehm] Select SGen or Boehm GC (runs mono or mono-sgen) What should l do next to run the .exe?