JirachiVP Posted July 26, 2010 Share Posted July 26, 2010 Hello. I was trying to set up a GTS server with HyperGTS. I followed the instructions from here. I can access the GTS, but others can't. I tried several programs. I tried sendpkm.py, HyperGTS and the modded HyperGTS version by Shiny Jirachi. My Ports are open (that's what pkmsendportcheck.exe says) I made a picture with my steps so maybe you can see where my mistake is Anyone has any idea what's wrong? Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 27, 2010 Share Posted July 27, 2010 My modified version needs to be run with an external DNS program (DNS Server v0.3). [Yes I'm shiny jirachi] Link to comment Share on other sites More sharing options...
JirachiVP Posted July 27, 2010 Author Share Posted July 27, 2010 As I tried with your version, I loaded both things from this thread and used them, of course. I also gave out the right IP. Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 30, 2010 Share Posted July 30, 2010 Make sure your ports are forwarded. You should forward port 80 and 53 on your router. Link to comment Share on other sites More sharing options...
JirachiVP Posted July 30, 2010 Author Share Posted July 30, 2010 i checked the ports with pkmsendportcheck.exe, they were open Link to comment Share on other sites More sharing options...
formlesstree4 Posted July 31, 2010 Share Posted July 31, 2010 Close programs like Skype and Teamviewer if you run those. Link to comment Share on other sites More sharing options...
JirachiVP Posted July 31, 2010 Author Share Posted July 31, 2010 i did, because skype is blocking port 80 ^^ still didn't work after that. Link to comment Share on other sites More sharing options...
Linklegend Posted July 31, 2010 Share Posted July 31, 2010 (edited) Try running a port check on this site http://ping.eu/port-chk/ Also your question is that internal ip working, but not the external? I kinda have the same problem but luckly my router has a heck customization options, even now I am tweaking with it:D Edited July 31, 2010 by Linklegend A very, very, VERY minor spelling mistake:D Link to comment Share on other sites More sharing options...
JirachiVP Posted July 31, 2010 Author Share Posted July 31, 2010 That site tells me that my ports are closed. Well, i guess it's an port error, but i wonder why pkmsendportcheck.exe says they are open Link to comment Share on other sites More sharing options...
Linklegend Posted July 31, 2010 Share Posted July 31, 2010 That site tells me that my ports are closed. Well, i guess it's an port error, but i wonder why pkmsendportcheck.exe says they are open Okay did you test both 53 and 80? When I off my firewall port 80 is open but still 53 is a problem.... Try deactivating your fire wall and anti virus just to check if it works or not. Link to comment Share on other sites More sharing options...
JirachiVP Posted July 31, 2010 Author Share Posted July 31, 2010 i deactivated all and activated the "exposed host" function on my router (all ports open), still not working. port 53 is afaik for the outgoing connection, it won't be open for incoming connections. but i may be wrong. Link to comment Share on other sites More sharing options...
Linklegend Posted July 31, 2010 Share Posted July 31, 2010 Well probaly your ISP does not support incoming connections>.< try DMZing it, if that doesn't work I am all out of ideas but does your port 80 show that its opened when you use that site? Link to comment Share on other sites More sharing options...
JirachiVP Posted July 31, 2010 Author Share Posted July 31, 2010 i have no clue what DMZing is ^^ after a bit of research, is it about deactivating the hardwarefirewall from my router? if so, i did that, too. the site says me that my port is closed, and it says that about all other ports too (even if i open ALL ports). Link to comment Share on other sites More sharing options...
Linklegend Posted July 31, 2010 Share Posted July 31, 2010 You are doing some wrong, or your ISP or router is the culprit:/ even after you disabled your pc firewall, opened every port it still doesn't work? Then its your ISP, for now the HyperGTS won't work then until there is a more compatible version did your ISP provide a PDF user manual? If so let me check it. Link to comment Share on other sites More sharing options...
JirachiVP Posted July 31, 2010 Author Share Posted July 31, 2010 THIS is the manual for my router, but i'm pretty sure it won't help you Link to comment Share on other sites More sharing options...
Linklegend Posted July 31, 2010 Share Posted July 31, 2010 Yeah you're right because its in Danish? I speak english. And I kinda found out what was I doing wrong maybe it my help. Go to the IP filtering and there you see two sections Incoming and Outcoming/Outgoing, Outcoming is open (duh) but incoming is blocked-so automatically it ignores any external IP unblock the ports and your done, And play with your router even though if you screw up you can always factory resset it or make a back-up. My router has a heck of different customization options and I'm sure the answer is in there. Link to comment Share on other sites More sharing options...
JirachiVP Posted August 1, 2010 Author Share Posted August 1, 2010 It's german i don't find anything with IP filtering or anyting similar. i guess i'm not supposed to do it i won't try any further. but still, thanks for your help. Link to comment Share on other sites More sharing options...
Iceblast Posted September 25, 2010 Share Posted September 25, 2010 i have been trying for a while to get my gts working using the complete distribution system , i can get into the gts but it wont send me any of the pkms i have Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now