Senbuza Posted June 27, 2019 Posted June 27, 2019 Hey guys, i just adjust my Platinium shiny rate with an Hex editor, but i'm trying adjust Black and Black2 but i cannot find the offset! I have this 2 roms: Black Version, Black Version 2 Can you help me please?
theSLAYER Posted June 27, 2019 Posted June 27, 2019 2 hours ago, Senbuza said: Hey guys, i just adjust my Platinium shiny rate with an Hex editor, but i'm trying adjust Black and Black2 but i cannot find the offset! I have this 2 roms: Black Version, Black Version 2 Can you help me please? check if the info on this post is accurate: and also, read this thread:
Senbuza Posted June 28, 2019 Author Posted June 28, 2019 15 hours ago, theSLAYER said: check if the info on this post is accurate: and also, read this thread: Hey, i tryied the first topic, but with the 9arm or the Hex editor i cannot find that Offset
Senbuza Posted June 28, 2019 Author Posted June 28, 2019 Anyone can change the Rate to FF and send a link to me? please 1
theSLAYER Posted June 28, 2019 Posted June 28, 2019 18 minutes ago, Senbuza said: Anyone can change the Rate to FF and send a link to me? please No. It's a ROM file. and requesting for it is against the rules.
Senbuza Posted June 28, 2019 Author Posted June 28, 2019 22 minutes ago, theSLAYER said: No. It's a ROM file. and requesting for it is against the rules. hoo, sorry, did not know! i really cant find the offset! i used everything! anyone can help me via discord with screen share?
theSLAYER Posted June 29, 2019 Posted June 29, 2019 4 hours ago, Senbuza said: hoo, sorry, did not know! i really cant find the offset! i used everything! anyone can help me via discord with screen share? Black 2 arm9 I know offset and data above for Black 2 is correct, as it matches what was given in the other thread: I tried using the offset of 0x13F0C for Black, but noticeably it didn't work for my copy of Black version. Offset probably is different because it's a different variant or different version ID. Since you mentioned you couldn't find it, I assume it's the same for you too. Based on the bytes found in the Black 2 arm 9, I searched for these bytes (not just 08 28, but rather the whole highlighted portion below), and a different offset with the same parts of data appeared. I'm assuming this is correct for my version of Black. You could do the same thing as me, and search for those bytes.Black arm9
Senbuza Posted June 29, 2019 Author Posted June 29, 2019 6 hours ago, theSLAYER said: Black 2 arm9 I know offset and data above for Black 2 is correct, as it matches what was given in the other thread: I tried using the offset of 0x13F0C for Black, but noticeably it didn't work for my copy of Black version. Offset probably is different because it's a different variant or different version ID. Since you mentioned you couldn't find it, I assume it's the same for you too. Based on the bytes found in the Black 2 arm 9, I searched for these bytes (not just 08 28, but rather the whole highlighted portion below), and a different offset with the same parts of data appeared. I'm assuming this is correct for my version of Black. You could do the same thing as me, and search for those bytes.Black arm9 Awesome, i will give it a try and let u know! This is for Black 2. 1
Senbuza Posted June 29, 2019 Author Posted June 29, 2019 5 hours ago, theSLAYER said: Black 2 arm9 I know offset and data above for Black 2 is correct, as it matches what was given in the other thread: I tried using the offset of 0x13F0C for Black, but noticeably it didn't work for my copy of Black version. Offset probably is different because it's a different variant or different version ID. Since you mentioned you couldn't find it, I assume it's the same for you too. Based on the bytes found in the Black 2 arm 9, I searched for these bytes (not just 08 28, but rather the whole highlighted portion below), and a different offset with the same parts of data appeared. I'm assuming this is correct for my version of Black. You could do the same thing as me, and search for those bytes.Black arm9 hello, i still not find! cannot undertand!
theSLAYER Posted June 29, 2019 Posted June 29, 2019 7 minutes ago, Senbuza said: hello, i still not find! cannot undertand! extract it out then use HxD (a hex editor)'s search function. In case you didn't realize, I'm not using Crystaltile's Hex viewer. In any case, even if you manage to replace the value and import the arm9 file back in, I cannot guarantee it'll work, so I don't make edits like that. ALSO, don't multi-post. If no one replied you, edit the new information into your latest unanswered post.
Senbuza Posted June 29, 2019 Author Posted June 29, 2019 1 hour ago, theSLAYER said: extract it out then use HxD (a hex editor)'s search function. In case you didn't realize, I'm not using Crystaltile's Hex viewer. In any case, even if you manage to replace the value and import the arm9 file back in, I cannot guarantee it'll work, so I don't make edits like that. ALSO, don't multi-post. If no one replied you, edit the new information into your latest unanswered post. Hey, i really dont know what happens! sorry as u can see, can´t find
theSLAYER Posted June 29, 2019 Posted June 29, 2019 28 minutes ago, Senbuza said: Hey, i really dont know what happens! sorry as u can see, can´t find Not the entire game. Use Crystaltile2 to extract the arm9, THEN use HxD to look for it.
theSLAYER Posted June 29, 2019 Posted June 29, 2019 7 minutes ago, Senbuza said: Still nothing! Show me the "Find" window you use, before you hit enter.
theSLAYER Posted June 29, 2019 Posted June 29, 2019 1 minute ago, Senbuza said: Still nothing! In that case either it wasn't extracted properly with Crystaltile, or the surrounding data is different (which it frankly shouldn't be). In any case, as it stands I won't be able to assist you any further. Hopefully someone with a better idea of what is going on would pop in to help you.
johncenamlg Posted May 14, 2021 Posted May 14, 2021 Sooooooo.... what does the file look like when its successfully coded?
theSLAYER Posted July 13, 2022 Posted July 13, 2022 I’ve already answered you twice. No need to post everywhere
Recommended Posts