Firmware 9.4.0-10E Pokemon Injection Not working

[Pickles]

I have tired to find a fix. I have used the Ram injection and online QR injection.

I have a Zelda 3DS on firmware 9.4.0-10E.

I have cleared the setting in the web browser.

I have entered in http://loadcode.projectpokemon.org manually and used a QR code. I have used Luna's QR code.

The files I am using are ekx either by changing the ek6 file into ekx or saving through "All Files".

I have formatted the console again and the SD card.

...but nothing. No injectiondebug.bin either.

What am I doing wrong or how can I fix this?

Using omega ruby, X and Y.

[Kaphotics]

RAM Injection requires system firmware 9.0.0-20 thru 9.5.0-22.

The key is -XX, which your applet firmware (for the web browser exploit) is not in the range.

[Pickles]

RAM Injection requires system firmware 9.0.0-20 thru 9.5.0-22.

The key is -XX, which your applet firmware (for the web browser exploit) is not in the range.

Ahh... then I'm screwed. I have access to a 3DS that has 6.3.0-12E but thats the lowest. Apart from that it's 9.6 and upwards.

Has there been any movement on an exploit for higher firmwares?

[Kaphotics]

Ahh... then I'm screwed. I have access to a 3DS that has 6.3.0-12E but thats the lowest. Apart from that it's 9.6 and upwards.

Has there been any movement on an exploit for higher firmwares?

There are exploits for lower firmwares.

3DS's with system firmware at 9.2.0 or below (not the applet -XX) have arm9/arm11 vulnerabilities which can be used to install SaveDataFiler.

I'd suggest using a cartridge to update to 7.X and use rxTools and SaveDataFiler, which will allow you to properly read retail encrypted carts.