Yet again troubles with HyperGTS

[ericthebanana]

Hey Guys,

I'm hoping to receive some help here, or some guidance...

OK, long story short. IR-GTS works fine along with Send.PKM. Both of these Programs work well

...However HyperGTS doesn't work at all. I try loading the PKM and its just says "GTS stopped"

also because one has to use the DNS server with the HyperGTS, I get a different problem...

I'd write on as to what the problem is though i feel it might be better understood if one would see the screens i get.

Here i shall leave the images of the problems...

I'd greatly appreciate anyones help. Thank you.

[formlesstree4]

Since IR-GTS works just fine, I'm not sure what exactly the issue is. Try using the GDS system instead with the built in DNS & GTS server rather than an older version of HyperGTS that I modified.

[ericthebanana]

One has tried the Old and New. With the Old one the DNS server seems to work, however the GTS starts and then stops quickly afterwards....

[formlesstree4]

If the DNS Server works, the GDS one should as well as it's literally the exact same code. The GTS shouldn't do the start/stop business unless there's another application interfering with it. The only reasons I can think that it would fail is the Sockets fail to bind on Port 80 and/or 53.

[ericthebanana]

I try the PKM port checker thing and it says both ports are open ...

[HyperDrill89]

does it work with Black and White?

[Jinderox]

Black and white uses different system, so it doesnt work.

[anon3536]

iv been having problems with my hypergts and the ir-gts it says something about 0000000123x000 something on my computer anyone got any ideas?