Jump to content
Sign in to follow this  
re11ding

Big discovery! Need help to finish!!

Recommended Posts

since i have converted the Motion 3D code to platinum, i've been trying to convert the Crazy Zoom v1.2 since then.. i've done so many tests but no luck so i stopped testing for a while. Today i got in the mood to start again since i had nothing else to do. i have found the camera address code for platinum!

If you want to help, make sure you already know advance things about the Action Replay

from my motion 3D code i was trying to figure out the address of the code line that is the camera address itself but it wasn't possible because it had the watch address so you could change the value through the calculator. while looking through the D/P Crazy Zoom code i found the D/P camera code address in it. let me explain.

here is the Motion 3D code i have converted to work: http://projectpokemon.org/forums/showthread.php?p=29129

see any similarities to the two?

Motion3D [D/P (U)]

94000130 FDFF0000

DA000000 02000002

B21C4D28 00000000

B0000004 00000000

D7000000 0000150E

DC000000 FFFFFFFE

94000130 FFF70000

DA000000 00112F56

D3000000 00000000

D7000000 02000002

D2000000 00000000

Motion3D [Platinum (U)]

94000130 fdff0000

da000000 02000002

b2101d40 00000000

d7000000 000012fe

dc000000 fffffffe

94000130 fff70000

da000000 00111d10

d3000000 00000000

d7000000 02000002

d2000000 00000000

look at the only bolded parts of the 2 codes. this is the usual main code in most codes for that game. now look at the itatlic line in the DP code, this never needs to be in the Platinum codes. now look at the only underlined part of the 2 codes. not sure why, but these are part of the camera code address. lastly look at the Bolded and underlined address and vaule, this is the watch calculator code that allows you to activate the camera with the vaule you put in. this is also acting as the camera value control instead of using the actual address which was unknown for platinum. now look below.

Crazy Zoom 1.2 D/P

B21C4D28 00000000

B0000004 00000000

DC000000 0000150E

A0000000 FF000004

D3000000 00000000

121CED48 0000F000

D2000000 00000000

B21C59A4 00000000

DA000000 0000001A

94000130 FCF30204

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30208

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 0000001A

D2000000 00000000

B21C59A4 00000000

DA000000 00000022

94000130 FCF30108

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30104

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 00000022

D2000000 00000000

B21C59A4 00000000

DA000000 0000002A

94000130 FCF30004

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30008

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 0000002A

D2000000 00000000

:: Features

* Zoom

o R+Start - Zoom in

o R+Select - Zoom out* Rotation Left/Right

o L+Select - Left

o L+Start - Right* Rotation Up/Down

o L+R+Start - Up

o L+R+Select - Down

this code gives a lot of control to the camera but doesn't use the calculator. this means the rest of the camera address is in here somewhere. I bolded it to make things easier. thats the DP camera address and i confirmed this by noticing its the only code on the left column that begins with a 0, 1, or 2 which is a register address to place the value as.

so finally here's the thing i need help with, i'm very close to converting the code, but there's just one more address that i'm not sure what to convert to (they are bolded)

Crazy zoom (platinum US) IN TESTING

b2101d40 00000000

DC000000 000012fe

A0000000 FF000004

D3000000 00000000

121C8B24 0000F000

D2000000 00000000

B21C59A4 00000000

DA000000 0000001A

94000130 FCF30204

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30208

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 0000001A

D2000000 00000000

B21C59A4 00000000

DA000000 00000022

94000130 FCF30108

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30104

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 00000022

D2000000 00000000

B21C59A4 00000000

DA000000 0000002A

94000130 FCF30004

D4000000 FFFFFFFF

D0000000 00000000

94000130 FCF30008

D4000000 00000001

D0000000 00000000

74000100 FF000020

D7000000 0000002A

D2000000 00000000

that address is the only thing left that i can't figure out how to convert. everything else should be fine. the things i underlined i am positive are right through testing. anything else i believe doesn't need to be touched for reasons that are just about impossible to explain and for studying every other differences in the 2 types of games (i coulted D and P as one type)

Any help would really be appreciated!! once this is done, its complete!! anyone that converts it correctly will get half the credit for finishing the code!! oh boy oh boy oh boy!! i'm getting too excited!!!

Share this post


Link to post
Share on other sites

I'm very busy at the moment, so I will not explain you the code line per line, but you don't need to convert the Crazy Zoom V1.2, I'm gonna work on a V2 soon.

Edited by ShinyPalkia

Share this post


Link to post
Share on other sites
I'm very busy at the moment, so I will not explain you the code line per line, but you don't need to convert the Crazy Zoom V1.2, I'm gonna work on a V2 soon.

what do you mean by that? you have a trainer toolkit or something? if you are really serious, then your telling me that all of my effort working on this was a waste of time. thanks a lot.

Share this post


Link to post
Share on other sites

I use hasteDS. But I don't think it was waste of time, you earned some experience on how to convert AR codes, may be. =/ I already posted the US version somewhere on the Internet, I don't remember if it was the V1 or the V1.2, but it hasn't any importance because, as I said, I'm gonna work on an better version soon.

Share this post


Link to post
Share on other sites
I use hasteDS. But I don't think it was waste of time, you earned some experience on how to convert AR codes, may be. =/ I already posted the US version somewhere on the Internet, I don't remember if it was the V1 or the V1.2, but it hasn't any importance because, as I said, I'm gonna work on an better version soon.

i've been a converter for a few years now. but it was for the game Super mario 64 DS v1.0 to v1.1 and vice versa. think you cuould find the code and/or link to code?

Edited by re11ding

Share this post


Link to post
Share on other sites

Speaking of Crazy Zoom v1.2, I can't get the code to work on my US Diamond version.

Cheat codes like 100% Pokeball catch rate work, but the Crazy Zoom one doesn't.

Any idea why?

(And I'm sure my L and R buttons work, because I can scroll through PC boxes with them.)

Share this post


Link to post
Share on other sites
Speaking of Crazy Zoom v1.2, I can't get the code to work on my US Diamond version.

Cheat codes like 100% Pokeball catch rate work, but the Crazy Zoom one doesn't.

Any idea why?

(And I'm sure my L and R buttons work, because I can scroll through PC boxes with them.)

hmm... thats odd. it worked on mine. your sure your start and select buttons work? i'm guessing they do but i'm just checking

Share this post


Link to post
Share on other sites

Yes they do, I can arrange items in my bag with Select and use Start to advance the title screen.

I'm using no$gba v2.6a by the way, does that matter?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...