Jump to content

Shiny GTS [Now with Gen V support!] (Now announcing Shiny DTS!)


Recommended Posts

Hey there!

Can someone help me? You see, I keep getting the same error code on my DS: 13274

I already turned off the firewall, the ports are open, the public ip has been switched and everything's the same as I use to do it, but now I'm getting that every time.

Why's that? Is anybody else having this problem?

Thanks!

Link to comment
Share on other sites

  • Replies 336
  • Created
  • Last Reply

Top Posters In This Topic

Hey there!

Can someone help me? You see, I keep getting the same error code on my DS: 13274

I already turned off the firewall, the ports are open, the public ip has been switched and everything's the same as I use to do it, but now I'm getting that every time.

Why's that? Is anybody else having this problem?

Thanks!

Is there any activity on ShinyDTS's GTS or DNS log?

Link to comment
Share on other sites

I fixed it!

turns out the ip was wrong =P

thanks

now i have other question. How is it that you can send a folder to your DS? it displays and error wiht something about the access route not being valid, and something about the IO path

Might've been an illegal path...I could have a formatting problem on it though...I'll double check.

Link to comment
Share on other sites

I need help, i created a pokemon with pokegen, but i dont know how to use Shinygts to send the pokemon to my game, can someone help me as to what i am suppose to do and the steps required?

Read the first post and this thread (http://projectpokemon.org/forums/showthread.php?8325-GTS-Servers-and-(Valid)-Pokemon-Creation-for-Dummies). Please don't spam the forums with the same post, and if you have questions, be specific.

Link to comment
Share on other sites

Read the first post and this thread (http://projectpokemon.org/forums/showthread.php?8325-GTS-Servers-and-(Valid)-Pokemon-Creation-for-Dummies). Please don't spam the forums with the same post, and if you have questions, be specific.

Well the link you gave me is for the GTS, so i'm not sure how that is going to help me run the Shiny gts unless they are relatively the same thing. My specific is i have a pokemon ready what do i do now on the gts program to send it over, what are the buttons i click? Do i send from folder after saving my pokemon in pokegen in a folder?

Link to comment
Share on other sites

Well the link you gave me is for the GTS, so i'm not sure how that is going to help me run the Shiny gts unless they are relatively the same thing. My specific is i have a pokemon ready what do i do now on the gts program to send it over, what are the buttons i click? Do i send from folder after saving my pokemon in pokegen in a folder?

It's pretty straight forward on how to send the Pokemon. You need to save it from PokeGen, then send the individual Pokemon. Run the GTS and DNS servers, making sure your ports are forwarded and go from there.

Link to comment
Share on other sites

Hi, formlessless4

l just installed the Python and IR-gts working fine would it be possible for us to try again and run it on my iMac l think it should work now in the terminal.

Hit me up through the chat or tell me when you're on.

Thanks in advance

Link to comment
Share on other sites

Hmm I have all the steps good until I've selected a Pokemon to trade, and when it usually would begin to send the pokemon off to the GTS I get a communication error, and the message in my attachment. Is there something I've done wrong that you can see? I've tried this with both Gens, the image below shows the Gen 4 actions.

You're using a local IP address. You have to find your computer's public (external) IP address, and then open ports 53 / 80.

Link to comment
Share on other sites

Immagine.png

Port 80 and 53 are open, I'm Sure! What's the problem?

Let me ask a few questions

Do you have any .pkm files in your Gen V folder?

Do you have set the IP same on DS as in the Shiny GTS?

Do you have a firewall on?

Note: It looks like the port 80 is open but to make sure 53 and 80 is open for traffic, use this port checker; http://portforward.com/help/portcheck.htm

Link to comment
Share on other sites

Let me ask a few questions

Do you have any .pkm files in your Gen V folder?

Do you have set the IP same on DS as in the Shiny GTS?

Do you have a firewall on?

Note: It looks like the port 80 is open but to make sure 53 and 80 is open for traffic, use this port checker; http://portforward.com/help/portcheck.htm

1)Do you have any .pkm files in your Gen V folder? There are file .pkm in Gen V Folder

2)Do you have set the IP same on DS as in the Shiny GTS? I don't Know.xD

3)Do you have a firewall on? No.

Note: I have used it

Link to comment
Share on other sites

1)Do you have any .pkm files in your Gen V folder? There are file .pkm in Gen V Folder

2)Do you have set the IP same on DS as in the Shiny GTS? I don't Know.xD

3)Do you have a firewall on? No.

Note: I have used it

Well the IP you have on ShinyGTS should be on your primary DNS on the WiFi DS settings too either it won't find your DNS server.

Other question "Could the portchecker ping your ports?"

Link to comment
Share on other sites

When I connect to the GTS I see this problem:

Communication error. For information, visit the website support.nientendo.com

Ok, Try run a connection test from the settings and make sure the DNS is on and GTS aswell on the program. If its not working then may you posted a screenshot when you run port 80 and 53 in the port checker and l can see what l can do about it.

Edit: Also make sure you run no Skype or any other program that block port 80.

Edited by Way Turner
Adding text
Link to comment
Share on other sites

Ok, Try run a connection test from the settings and make sure the DNS is on and GTS aswell on the program. If its not working then may you posted a screenshot when you run port 80 and 53 in the port checker and l can see what l can do about it.

Edit: Also make sure you run no Skype or any other program that block port 80.

I can't connect.

Port 53: http://img6.imagebanana.com/img/mrjnq3j7/Immagine.png

port 80: http://img6.imagebanana.com/img/whjeby3w/Immagine2.png

Link to comment
Share on other sites

l just tried myself and its working fine, Well HyperGTS only works for 4th Gen and ShinyGTS works for both generation depend on which you have set but make sure your .pkm files is 236 kilobyte (5th Gen Party Pokemon Files) try running 4th gen files with 5th gen mode won't work. If you need to convert your files to 5th Gen download this: http://projectpokemon.org/forums/showthread.php?14371-Pok%E9-Transfer&highlight=Poke+Transfer

Link to comment
Share on other sites

l just tried myself and its working fine, Well HyperGTS only works for 4th Gen and ShinyGTS works for both generation depend on which you have set but make sure your .pkm files is 236 kilobyte (5th Gen Party Pokemon Files) try running 4th gen files with 5th gen mode won't work. If you need to convert your files to 5th Gen download this: http://projectpokemon.org/forums/showthread.php?14371-Pok%E9-Transfer&highlight=Poke+Transfer

The files are 136Kb...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...