Pokegen code doesnt load

[oifik]

Even then, how can some people get it to work, and some don't?

[Codr]

Even then, how can some people get it to work, and some don't?

The people that're getting it to work are using less codes... and clearly saying so.

[zeifer25]

I know that all of the codes for my Pokemon White are working with my Action Replay DSi.

To have them all work, 100% of the time, I had to do the following:

1) Update the firmware of the AR Cartridge to v1.25

2) When using the PokeGen codes, ONLY use the PokeGen codes by themselves. Using them at the same time with the Code Junkies codes tended to throw some errors / white screens at me.

3) When generating the codes, I found it more effective to generate a code for each individual Pokemon and save them separately into the AR Code list. Then, when I go to activate the codes, I only activate 2 at a time.

By following these rules, I haven't had any problems with the codes that were not of "human error".

I hope this helps anyone.

[oifik]

So, any idea what to do for the time being? I mean; Is this a unsolvable issue or..?

[zeifer25]

So, any idea what to do for the time being? I mean; Is this a unsolvable issue or..?

It's like what codr said - there's nothing wrong with PokeGen, or the Code Junkies codes. The problem arises when you try to use too much code all at once, and the hardware just can't take it.

Until the makers of Action Replay comes out with a brand-new AR device that solves this issue - the only thing you can do is - use less codes at a time.

[oifik]

Hmm alright, do you think that R4 will work fine with these codes? I mean; I've seen tons of Wi-Fi battles on YT of people who're clearly using Sav'd/Gen'd pokemon.

[zeifer25]

I don't knkow. I've only used the retail cartridges.

[ace10301]

(I've read SO MUCH about pokegen today I'm not going to bother rereading all of these, please don't ban me mods) Problem I was having was that my codes wouldn't work, BUT i figured out my secret ID (thank god that took forever) and now pokegen is working just fine, just make sure you have your ID, SID and Name all put in correctly.

[Supreme]

(I've read SO MUCH about pokegen today I'm not going to bother rereading all of these, please don't ban me mods) Problem I was having was that my codes wouldn't work, BUT i figured out my secret ID (thank god that took forever) and now pokegen is working just fine, just make sure you have your ID, SID and Name all put in correctly.

But if you do this than I don't think you can be able to make your Pokemon shiny..

[ace10301]

Not true, the one pokemon i tried it with was shiny.

[ace10301]

However I am having problems again, the only pokemon it worked with was the first one I tried.

[ace10301]

Also, just figured this out... Only works with 5th gen pokemon?
first time with haxorus worked,
second time with jolteon did not work
third time with Samurott worked. This sucks, the whole reason i want pokegen is so that I can use non 5th gen pokemon easier..... :/

[snakes on a wii]

I am having this same problem. Using Pokemon Black with updated AR firmware on the DS Lite

I tried earlier today with a single pokemon, Aerodactyl with no held items and it worked just fine

Trying now with 7 pokemon I can't get it to work, with or without held items, and even when I only try one pokemon per code at a time. The only other changes I made besides the species of the pokemon were where it was from ("Faraway Place").

[ace10301]

Try to make the origin of the pokemon a realistic place. Like charizard have it be fire red. not black/white.(idk just tried with charizard did fire red and it worked lol)

[snakes on a wii]

I finally managed to make it work. When I used export and dragged the xml directly into the AR it caused problems. Instead I just generated the codes and manually entered them using the "add new code" option, and then dragged the codes over, and it all worked under the usual caveats (no more than two pokemon at a time, etc).